A golf club who is celebrating their 100th anniversary has commissioned me to fabricate
11 books with all details pertaining details of each course. Details are on the right page
and on the other one is a description of one of the past presidents and founder.
I use HDU 18 pounds 2''. It takes an average of 8 to 10 hours to fabricate one, beside sanding and painting. My wife is very good at painting and of great help,thank you Gisele.
This contract justify the purcase of upgrading to Aspire 4, thank you Vectric.
The small lettering is possible thanks to the v-60 bit from Dimar model 105RR4-60
Book for Golf Club
-
- Vectric Apprentice
- Posts: 73
- Joined: Thu Mar 13, 2008 11:04 pm
- Location: Granby,Qc, Canada
- Contact:
-
- Vectric Wizard
- Posts: 858
- Joined: Wed Aug 16, 2006 7:34 pm
- Model of CNC Machine: shopbot 48x48 upgraded prt
- Location: Monessen, Pa
- Contact:
Re: BOOK FOR GOLF CLUB
Gerry, that is one fantastic project.
Bob
Bob
-
- Vectric Wizard
- Posts: 679
- Joined: Thu Jan 15, 2009 1:08 am
- Model of CNC Machine: AXYZ 5010
- Location: Maryhill Ontario Canada
- Contact:
-
- Vectric Apprentice
- Posts: 73
- Joined: Thu Mar 13, 2008 11:04 pm
- Location: Granby,Qc, Canada
- Contact:
Re: Book for Golf Club
first thanks for the people that replied. I finally
finish carving the 11 books i had to do. It took a long
time because some of them had more text then the other
from 10 to 12 hours each just for roughing and finishing.
Yesterday i was able to prime all of them and this morning
the base colour. Now it is up to my wife to fill inthe last colours
then it will be cover with 3 layers of transparent varnish.
I will show you after everything is done what it will look like
allpainted.
finish carving the 11 books i had to do. It took a long
time because some of them had more text then the other
from 10 to 12 hours each just for roughing and finishing.
Yesterday i was able to prime all of them and this morning
the base colour. Now it is up to my wife to fill inthe last colours
then it will be cover with 3 layers of transparent varnish.
I will show you after everything is done what it will look like
allpainted.
I rather be the leader,than the follower
-
- Vectric Apprentice
- Posts: 73
- Joined: Thu Mar 13, 2008 11:04 pm
- Location: Granby,Qc, Canada
- Contact:
Re: Book for Golf Club
Those books you carved were beautiful works of art. What did you carve them out of?
-
- Vectric Apprentice
- Posts: 73
- Joined: Thu Mar 13, 2008 11:04 pm
- Location: Granby,Qc, Canada
- Contact:
Re: Book for Golf Club
Thank you
I have used HDU 2''.
Gerry
I have used HDU 2''.
Gerry
I rather be the leader,than the follower