Another Tutorial?
- bgriggs
- Vectric Wizard
- Posts: 306
- Joined: Sat Aug 20, 2005 2:29 pm
- Model of CNC Machine: Warp Drive Project R&P
- Location: Canastota NY
- Contact:
Another Tutorial?
I am thinking of doing another tutorial. What do you think about edge lit signs?
Bill
Bill
Re: Another Tutorial?
I'd like to see that!
Ken Zey
Rogers, AR
http://www.CedarSlabSigns.com
http://www.lookoutmercantile.com
Shopbot PRS Alpha 72x144
Rogers, AR
http://www.CedarSlabSigns.com
http://www.lookoutmercantile.com
Shopbot PRS Alpha 72x144
-
- Vectric Apprentice
- Posts: 62
- Joined: Sun Mar 17, 2013 7:48 pm
- Model of CNC Machine: ShopBot Buddy 48T PRS alpha HSD 2.2HP
- Location: Fruitport, MI
Re: Another Tutorial?
I would like to see that too.
-
- Vectric Apprentice
- Posts: 60
- Joined: Tue Mar 16, 2010 1:38 am
- Model of CNC Machine: MechMate
Re: Another Tutorial?
I also would like to see this tutorial
Re: Another Tutorial?
Yea, that would be good. I was just thinking about making a backlite sign and that would help.
Wally
Wally
-
- Vectric Apprentice
- Posts: 55
- Joined: Sun Jul 25, 2010 3:04 pm
- Model of CNC Machine: legacy artie 56
- Location: Knoxville Tennessee
Re: Another Tutorial?
Bill
I also would like a tutorial on edge lit signs.I would like the materials and tools you use and i thank you for the effort
I also would like a tutorial on edge lit signs.I would like the materials and tools you use and i thank you for the effort
legacy arty 58, vcarve pro, cut 3d, photo vcarve, 3d machinist, aspire,Turbocad 18,coreldraw x5
- bgriggs
- Vectric Wizard
- Posts: 306
- Joined: Sat Aug 20, 2005 2:29 pm
- Model of CNC Machine: Warp Drive Project R&P
- Location: Canastota NY
- Contact:
Re: Another Tutorial?
What other information would you like me to include?
Bill
Bill
-
- Vectric Apprentice
- Posts: 86
- Joined: Tue Jan 29, 2013 4:28 am
- Model of CNC Machine: Digital Tool CNC Router + Speedy 400 120
- Location: Mercer, PA
- Contact:
Re: Another Tutorial?
i would love to see one as well!
if you need any led stuff i would be glad to donate whatever you need for it
if you need any led stuff i would be glad to donate whatever you need for it
- sawmiller
- Vectric Wizard
- Posts: 531
- Joined: Sat May 03, 2008 8:34 pm
- Model of CNC Machine: joe's rack and pinion hybrid
- Location: camden,tn
Re: Another Tutorial?
Bill,
A drag bit vs bit would be nice. Side by side as it were.
Feeds and speeds, etc
A drag bit vs bit would be nice. Side by side as it were.
Feeds and speeds, etc
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn
In the heart of Tn
Re: Another Tutorial?
I would like to see you include information about the light source and power source for the light you use.
Robert
Robert
- Xxray
- Vectric Wizard
- Posts: 2304
- Joined: Thu Feb 17, 2011 8:47 am
- Model of CNC Machine: CAMaster Stinger 1
- Location: MI USA
Re: Another Tutorial?
Can't have too many tutorials, but unless there is a dedicated section for these, I question if this is worth the effort, as everything requested and then some has already been pretty well covered and can be found using search.
But if you have the time, expertise & inclination, go for it. My only advice would be to be as comprehensive as possible, and include lots of pics.
But if you have the time, expertise & inclination, go for it. My only advice would be to be as comprehensive as possible, and include lots of pics.
Doug
-
- Vectric Apprentice
- Posts: 55
- Joined: Sun Jul 25, 2010 3:04 pm
- Model of CNC Machine: legacy artie 56
- Location: Knoxville Tennessee
Re: Another Tutorial?
Bill
How is the tutorial coming, really excited i know it takes a lot of time and work.
Will keep looking and thanks
john
How is the tutorial coming, really excited i know it takes a lot of time and work.
Will keep looking and thanks
john
legacy arty 58, vcarve pro, cut 3d, photo vcarve, 3d machinist, aspire,Turbocad 18,coreldraw x5
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: Another Tutorial?
I disagree with you.Xxray wrote:Can't have too many tutorials, but unless there is a dedicated section for these, I question if this is worth the effort, as everything requested and then some has already been pretty well covered and can be found using search.
But if you have the time, expertise & inclination, go for it. My only advice would be to be as comprehensive as possible, and include lots of pics.
It would be very nice to have it all in one document and be able to print it out.
Cheers
Wolffie
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
- Xxray
- Vectric Wizard
- Posts: 2304
- Joined: Thu Feb 17, 2011 8:47 am
- Model of CNC Machine: CAMaster Stinger 1
- Location: MI USA
Re: Another Tutorial?
Don't think it matters all that much, it seems most tutorial prospects fade away into oblivion. Best thing to do would probably be just do it and post, without seeking opinions of this or that. I do think a tutorial section would very much be in order, many topic specific forums have a tutorial section.Wolffie wrote:I disagree with you.Xxray wrote:Can't have too many tutorials, but unless there is a dedicated section for these, I question if this is worth the effort, as everything requested and then some has already been pretty well covered and can be found using search.
But if you have the time, expertise & inclination, go for it. My only advice would be to be as comprehensive as possible, and include lots of pics.
It would be very nice to have it all in one document and be able to print it out.
Cheers
Wolffie
Doug