St Francis

The Gallery is for posting images of work machined using Cut3D
Post Reply
Bob Reda
Vectric Wizard
Posts: 775
Joined: Wed Aug 16, 2006 7:34 pm
Model of CNC Machine: shopbot 48x48 upgraded prt
Location: Monessen, Pa
Contact:

St Francis

Post by Bob Reda »

Here's a model of St Francis I just completed it is 9.5x14.5
Used 1/4"bn for rough and 1/8" for final pass
took 4 1/2 hours
Attachments
St Francis.jpg

gcioffi
Vectric Apprentice
Posts: 84
Joined: Thu Mar 06, 2008 1:09 pm
Location: Italy, Caserta

Post by gcioffi »

very good

is file stl ?

Bob Reda
Vectric Wizard
Posts: 775
Joined: Wed Aug 16, 2006 7:34 pm
Model of CNC Machine: shopbot 48x48 upgraded prt
Location: Monessen, Pa
Contact:

Post by Bob Reda »

yes it is. I got it through the 3dmodel club

Lazyman
Posts: 3
Joined: Fri Nov 14, 2008 6:26 pm

Re: St Francis

Post by Lazyman »

I realize this was posted a quiet a while a go, but can what kind of wood is that carving made of and what did you finish it with?

Bob Reda
Vectric Wizard
Posts: 775
Joined: Wed Aug 16, 2006 7:34 pm
Model of CNC Machine: shopbot 48x48 upgraded prt
Location: Monessen, Pa
Contact:

Re: St Francis

Post by Bob Reda »

The wood is maple and I believe I put on two coats of finish then van dyke brown glaze over top and another coat of finsih.

Bob

Lazyman
Posts: 3
Joined: Fri Nov 14, 2008 6:26 pm

Re: St Francis

Post by Lazyman »

Thanks!

It looks great!

cabnet636
Vectric Wizard
Posts: 2583
Joined: Fri Dec 21, 2007 1:57 am
Model of CNC Machine: CAMaster 508 ATC
Location: columbia sc
Contact:

Re: St Francis

Post by cabnet636 »

bob that is really nice!!

jim
James McGrew
http://www.mcgrewwoodwork.com
CAMaster ATC 508 24/7 http://dropc.am/p/EJaKyl

Bruce Dorworth
Vectric Apprentice
Posts: 62
Joined: Wed Jan 14, 2009 8:33 am

Re: St Francis

Post by Bruce Dorworth »

I am interested in cutting one of these. Can the model be purchased some where?

Bruce

User avatar
capnl
Vectric Wizard
Posts: 416
Joined: Thu Sep 25, 2008 4:31 pm
Model of CNC Machine: Heiz Z-1000
Location: The Netherlands - Zuidland (3214)
Contact:

Re:

Post by capnl »

Bob Reda wrote:yes it is. I got it through the 3dmodel club
http://www.3dmodelclub.com/component/op ... temid,112/

Image
DRW-Holland
CNC-Step S-1000 machine 1000 x 590 x 110 mm
Aspire - VCarve Pro - Photo VCarve - Cut3D

loobyloo
Posts: 5
Joined: Mon Nov 03, 2008 1:11 pm

Re: St Francis

Post by loobyloo »

That's simply amazing.

Post Reply