Submissions

Tips, tricks and questions about the free Design and Make 3D Machinist from https://store.designandmake.com/ - Design & Make projects

Moderator: Todd Bailey

Locked
CRFultz
Vectric Wizard
Posts: 1160
Joined: Tue Mar 28, 2006 4:21 pm
Location: Longview, Texas

Submissions

Post by CRFultz »

Here's my first....simple design of my favorite subject...many more to follow :D

Chuck
Attachments
One_entry.jpg
(132.43 KiB) Downloaded 2403 times

CRFultz
Vectric Wizard
Posts: 1160
Joined: Tue Mar 28, 2006 4:21 pm
Location: Longview, Texas

Post by CRFultz »

And another...this one will probably get made
Attachments
BarZ.jpg
(125.64 KiB) Downloaded 2100 times

User avatar
Paul_n
Vectric Wizard
Posts: 316
Joined: Mon Aug 22, 2005 1:12 am
Model of CNC Machine: ShopBot PR96
Location: Cartersville, Georgia

Post by Paul_n »

Here is a design, using both the "Rope" and the "Sloop" - "B" - files.


Paul N
Attachments
Silver_Sloop_plate.jpg
(108.3 KiB) Downloaded 2013 times

User avatar
js11110
Vectric Wizard
Posts: 859
Joined: Tue Apr 18, 2006 12:19 pm
Location: Sunny Florida

Post by js11110 »

Heres my entry. I might take a drive to the actual Pelican Yatch Club, and see if they would actually want to buy something like this.

Jason
Attachments
pelican.jpg
(124.81 KiB) Downloaded 1836 times
The Official Vectric Cartographer


You are limited only by your imagination

Warren
Vectric Craftsman
Posts: 181
Joined: Wed Nov 30, 2005 3:08 pm
Model of CNC Machine: Router
Location: Bordeaux, France

Post by Warren »

This is my first attempt,
I will hopefully present others later.
Attachments
These are my nuts 2.jpg
(144.02 KiB) Downloaded 1640 times
These are my nuts.jpg
(288.21 KiB) Downloaded 2042 times

Warren
Vectric Craftsman
Posts: 181
Joined: Wed Nov 30, 2005 3:08 pm
Model of CNC Machine: Router
Location: Bordeaux, France

Post by Warren »

Here is another.

Eagle on a Rope.
Attachments
Eagle on a Rope.jpg
(117.17 KiB) Downloaded 1835 times

User avatar
Paco
Vectric Wizard
Posts: 480
Joined: Fri Sep 16, 2005 6:30 pm
Location: Valcourt, Québec, Canada
Contact:

Post by Paco »

Ok, if this is about having fun BEFORE/INSTEAD getting into the "most/best" whatever than here my shot #1.
Attachments
paco_having_fun_shot1.jpg
(149.45 KiB) Downloaded 1784 times

User avatar
Paul_n
Vectric Wizard
Posts: 316
Joined: Mon Aug 22, 2005 1:12 am
Model of CNC Machine: ShopBot PR96
Location: Cartersville, Georgia

Post by Paul_n »

A 'Cross_and_Lily' .


Paul N
Attachments
Cross_and_Lily.jpg
(65.53 KiB) Downloaded 1661 times

mark296
Vectric Craftsman
Posts: 260
Joined: Tue Jun 13, 2006 3:34 am
Location: Vermont

A guitar

Post by mark296 »

Guitar
Attachments
guitar.jpg
(48.13 KiB) Downloaded 1796 times

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5916
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Stable Entrance

Post by Rcnewcomb »

Stable Entrance
Attachments
mini-StableEntrance.jpg
(104.62 KiB) Downloaded 1624 times

mark296
Vectric Craftsman
Posts: 260
Joined: Tue Jun 13, 2006 3:34 am
Location: Vermont

Grandchildren

Post by mark296 »

Here are my three grandchildren.

mark296
Vectric Craftsman
Posts: 260
Joined: Tue Jun 13, 2006 3:34 am
Location: Vermont

Post by mark296 »

Warren wrote:This is my first attempt,
I will hopefully present others later.
Warren,
I like your nut bowl, very nice.

Ernie
Posts: 22
Joined: Wed May 31, 2006 11:59 pm
Location: Malta NY
Contact:

Post by Ernie »

Great Idea. Great Designs!

CRFultz
Vectric Wizard
Posts: 1160
Joined: Tue Mar 28, 2006 4:21 pm
Location: Longview, Texas

Post by CRFultz »

This one is for me....the Eagle and Rope help set it off.
I plan to attach the eagle so it will appear to be holding the plaque in flight.
I'll post a pic when its done.

thanks again James!

Chuck


Should I make the Eagle bigger?....what do you guys think...

Jason
Posts: 21
Joined: Sun Sep 24, 2006 12:53 am
Location: Denver, PA, USA

Post by Jason »

Here are some more designs.

Jason

Locked