Help Please

Tips, tricks and questions about the free Design and Make 3D Machinist from https://store.designandmake.com/ - Design & Make projects

Moderator: Todd Bailey

Post Reply
BigC
Vectric Wizard
Posts: 407
Joined: Tue Apr 02, 2019 7:06 pm
Model of CNC Machine: Workbee

Help Please

Post by BigC »

Is there a FREE file on D&M namely IN THE MAGICAL GARDEN
via link on FB
:https://store.designandmake.com/shop/product/19480

I just gave my details but the file wont open
have I been scammed ???
Regards
C

User avatar
Olly
Vectric Staff
Posts: 452
Joined: Tue Jan 15, 2019 1:14 pm
Model of CNC Machine: ShopBot, CNC Shark
Contact:

Re: HELP PLEASE

Post by Olly »

If you log in on Design & Make store go to where it says Hi ... next to Download Machinist then click View Account then Free Products it should be there!

Thanks

Olly

BigC
Vectric Wizard
Posts: 407
Joined: Tue Apr 02, 2019 7:06 pm
Model of CNC Machine: Workbee

Re: HELP PLEASE

Post by BigC »

omanton wrote:
Wed Apr 01, 2020 4:40 pm
If you log in on Design & Make store go to where it says Hi ... next to Download Machinist then click View Account then Free Products it should be there!

Thanks

Olly
It is but when I download it ...it won't open others having probs too..Wonder if Todd knows whats going on. Unusual for him not to put it on here first as it's Vectric linked.
gift.PNG
gift2.PNG
I submitted my details...CONCERNED...I really should have checked first

User avatar
Todd Bailey
Vectric Staff
Posts: 621
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC
Contact:

Re: HELP PLEASE

Post by Todd Bailey »

Olly is correct...

You need to log into your D&M account and then goto you Free Products... it can be downloaded from there.

I suspect you may have gone down to the bottom of the project page and added the "Project Hack" to your cart and attempted to purchase only the free part.

This is not a scam at all... promise... might seem like it is too good to be true, a free project... but it's not a scam.

Todd
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com

User avatar
scottp55
Vectric Wizard
Posts: 4704
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: HELP PLEASE

Post by scottp55 »

It was under the D&M thread C;
viewtopic.php?f=43&t=34328
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

BigC
Vectric Wizard
Posts: 407
Joined: Tue Apr 02, 2019 7:06 pm
Model of CNC Machine: Workbee

Re: HELP PLEASE

Post by BigC »

Todd Bailey wrote:
Wed Apr 01, 2020 4:47 pm
Olly is correct...

You need to log into your D&M account and then goto you Free Products... it can be downloaded from there.

I suspect you may have gone down to the bottom of the project page and added the "Project Hack" to your cart and attempted to purchase only the free part.

This is not a scam at all... promise... might seem like it is too good to be true, a free project... but it's not a scam.

Todd
PHEW! Thanks, Todd
Saved my skin.
My virus checker wouldn't let it pass but subsequently allowed it with a message that it had been cleared.
Red Flags all over.
Stand Down Guys all is well
Crisis over.
THANKS, TODD FOR THE FREE FILES AND THANKS AGAIN FOR YOUR PROMPT ATTENTION TO MY HASTY OVERREACTION
Regards
C

User avatar
Todd Bailey
Vectric Staff
Posts: 621
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC
Contact:

Re: HELP PLEASE

Post by Todd Bailey »

Not a problem BigC...

Glad we got this sorted out.

Todd
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com

Post Reply