This post is for all the Design and Make enthusiasts out there!
Just a quick post to keep you up to date on what is new over at www.DesignandMake.com.
=========================================
Introducing our latest Hack of the Week Model Project
Hack of the Week No.204
https://store.designandmake.com/shop/product/19329
Now that the new year is here, it might be the time to reflect on last year and see if there is anything you can do to make this year better. Having a weekly plan for meals might remove a bit of stress and save you a bit of time.
Add a bit of chalkboard paint to the plaques, and every week wipe off the old and replace it with the new! This project might save you a bit of money on your food bill... and we all could use that!
or
If the included Assembled Layout is not just quite right, you have all you need to make it your own. Recreate the bits you like using the single models included in the hack and then add in some of your own!
4 models, 1 assembled layout, 1 Project Sheet. All offered in .V3M format for VCarve Pro 8, VCarve Desktop or Aspire.
Remember, all the models in this pack can be cut as individual models or combined with other models in your library.
=========================================
Browse all of our Hack of the Week Model Projects... https://store.designandmake.com/search/ ... ype=search
Check out what other Design and Make users have been up to - http://designandmakeit.com/index.php/ca ... mer-focus/
Don't forget to follow us on:
FB - https://www.facebook.com/designandmakeit
Instagram - https://www.instagram.com/designandmakeit/
Twitter - https://twitter.com/DesignAndMakeIt
Meal Planner - Hack of the Week No.204
Moderator: Todd Bailey
- Todd Bailey
- Vectric Staff
- Posts: 625
- Joined: Mon Nov 24, 2014 8:40 pm
- Model of CNC Machine: CraftCNC
- Contact:
Meal Planner - Hack of the Week No.204
- Attachments
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
Todd Bailey | Design and Make
DesignAndMake.com
Re: Meal Planner - Hack of the Week No.204
Good morning Todd. I received a message from you and can not for the life of me figure out how to reply. So for starters, please help me with some direction on how to reply.
Sorry for posting here. It was the only thing I could think to do. You of course can delete this post after we "connect" elsewhere.
Thanks and Happy New Year!!
Don
Sorry for posting here. It was the only thing I could think to do. You of course can delete this post after we "connect" elsewhere.
Thanks and Happy New Year!!
Don
- Todd Bailey
- Vectric Staff
- Posts: 625
- Joined: Mon Nov 24, 2014 8:40 pm
- Model of CNC Machine: CraftCNC
- Contact:
Re: Meal Planner - Hack of the Week No.204
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
Todd Bailey | Design and Make
DesignAndMake.com