Can anyone help with this post processor? I drop it in Photo Carve post file and I get this error code. ( attached)
Omnitech PP does not show up in file.
Selexx Post Processor
-
- Posts: 8
- Joined: Thu Apr 04, 2019 11:23 pm
- Model of CNC Machine: Selexx 4x8 fanuc (right to left)
Re: Selexx Post Processor
It looks like the post-processor that you've tried has support for arcs and is intended for more recent products like Cut2d/VCarve/Aspire. Photo V-Carve is an older product and it predates the support for arc moves.
If you have a Omnitech PP without arc support, you can try that one. Alternatively all the sections and variables related to arc moves have to be removed from the PP before Photo V-Carve will be able to use it.
I hope that this makes sense,
Greg K
If you have a Omnitech PP without arc support, you can try that one. Alternatively all the sections and variables related to arc moves have to be removed from the PP before Photo V-Carve will be able to use it.
I hope that this makes sense,
Greg K
-
- Vectric Craftsman
- Posts: 214
- Joined: Wed Sep 17, 2014 6:53 am
- Model of CNC Machine: Omnitech 4X8 with 8 tool
Re: Selexx Post Processor
what type of selexx you have,
i hve 4X8 pal with 8 tool and drill block
if it is the same i can sent you my pp
OR change tool name, make it simple with no much of numbers or symbols.
i hve 4X8 pal with 8 tool and drill block
if it is the same i can sent you my pp
OR change tool name, make it simple with no much of numbers or symbols.