Selexx Post Processor

This forum is for general discussion about PhotoVCarve.
Post Reply
Benton Contruction
Posts: 6
Joined: Thu Apr 04, 2019 11:23 pm
Model of CNC Machine: Selexx 4x8 fanuc (right to left)

Selexx Post Processor

Post by Benton Contruction »

Can anyone help with this post processor? I drop it in Photo Carve post file and I get this error code. ( attached)

Omnitech PP does not show up in file.
Attachments
error code PP.png

gregk
Vectric Staff
Posts: 96
Joined: Mon Mar 05, 2018 12:34 pm
Model of CNC Machine: None

Re: Selexx Post Processor

Post by gregk »

It looks like the post-processor that you've tried has support for arcs and is intended for more recent products like Cut2d/VCarve/Aspire. Photo V-Carve is an older product and it predates the support for arc moves.
If you have a Omnitech PP without arc support, you can try that one. Alternatively all the sections and variables related to arc moves have to be removed from the PP before Photo V-Carve will be able to use it.

I hope that this makes sense,
Greg K

monlover
Vectric Craftsman
Posts: 113
Joined: Wed Sep 17, 2014 6:53 am
Model of CNC Machine: Omnitech 4X8 with 8 tool

Re: Selexx Post Processor

Post by monlover »

what type of selexx you have,
i hve 4X8 pal with 8 tool and drill block
if it is the same i can sent you my pp


OR change tool name, make it simple with no much of numbers or symbols.

Post Reply