Photo Vcarve giving me errors on my machine?
-
- Posts: 27
- Joined: Fri Feb 08, 2019 6:31 pm
- Model of CNC Machine: AXYZ Pacer
Photo Vcarve giving me errors on my machine?
Hello. I'm new to photo Vcarve. I only have the trial version as I am figuring out if its right for me. I'm having errors with my program though. Image size is 7.8" X 7.8" Z zero is from machine table (how i always do it in vcarve) material thickness is 1 inch. Cutting parameters im using a 30 degree engraving bit. It is tool number 8 in my tool changer and i have that set in my program but it keeps putting in tool 1 instead of 8. Also when it puts tool 1 in i get an error saying T1 197.14 (+X) e306. I'm sure you folks dont know what that means but maybe someone can give me some advice as how to better set this program up. I use Vcarve pro and aspire with no problems. The post processor is (AXYZ) .nc
-
- Posts: 27
- Joined: Fri Feb 08, 2019 6:31 pm
- Model of CNC Machine: AXYZ Pacer
Re: Photo Vcarve giving me errors on my machine?
Error Code 302 report: "Tool 1 cannot be commanded to move to Z=26.924. Tool qualify length is -7.625. Problems occur on NC line N60G43Z26.924H1
- Mark
- Vectric Staff
- Posts: 1058
- Joined: Sat Aug 18, 2007 2:55 pm
- Model of CNC Machine: CNC Shark, ShopBot, Roland PNC3000
- Location: Alcester U.K.
- Contact:
Re: Photo Vcarve giving me errors on my machine?
Hello,
What post processor have you selected from the list within PhotoVCarve?
Is this the same post processor / machine that you use with VCarve Pro?
Please let us know.
What post processor have you selected from the list within PhotoVCarve?
Is this the same post processor / machine that you use with VCarve Pro?
Please let us know.
-
- Posts: 27
- Joined: Fri Feb 08, 2019 6:31 pm
- Model of CNC Machine: AXYZ Pacer
Re: Photo Vcarve giving me errors on my machine?
In vcarve pro i have AXYZ A2MC (inch) (*.nc). Is that my problem? I am unable to find A2MC in PVC.
- Mark
- Vectric Staff
- Posts: 1058
- Joined: Sat Aug 18, 2007 2:55 pm
- Model of CNC Machine: CNC Shark, ShopBot, Roland PNC3000
- Location: Alcester U.K.
- Contact:
Re: Photo Vcarve giving me errors on my machine?
Hello,
Please find the attached post processor.
Please copy the file to the "PostP" folder of PhotoVCarve trial edition.
This is usually located at "C\Program Files (x86)\PhotoVCarve Trial\PostP"
(Assuming a 64 bit edition of Microsoft Windows).
Once you have copied the new post processor, exit the application and restart it.
The new post processor will be labelled as "AXYZ A2MC (inch) (*.nc)"
in the list of post processors. Please give this a try with your machine.
I hope that this helps.
Please find the attached post processor.
Please copy the file to the "PostP" folder of PhotoVCarve trial edition.
This is usually located at "C\Program Files (x86)\PhotoVCarve Trial\PostP"
(Assuming a 64 bit edition of Microsoft Windows).
Once you have copied the new post processor, exit the application and restart it.
The new post processor will be labelled as "AXYZ A2MC (inch) (*.nc)"
in the list of post processors. Please give this a try with your machine.
I hope that this helps.
- Attachments
-
- AXYZ_A2MC_ATC_Inch.pp
- (3.19 KiB) Downloaded 200 times
-
- Posts: 27
- Joined: Fri Feb 08, 2019 6:31 pm
- Model of CNC Machine: AXYZ Pacer
Re: Photo Vcarve giving me errors on my machine?
Thank you Mark. This fixed all the issues i was having and I'm carving out a picture now as i type this!