There is supposed to be a modeling tab on the bottom left next to or under Drawings, but it's not there and I can't find it anywhere.
The manual says the tab is normally found on the bottom left after Drawings, but no mention of where it is found abnormally.
Suggestions?
Thanks
Ed
VCarve Pro Missing Modeling tab
-
- Posts: 25
- Joined: Tue Sep 17, 2024 9:13 pm
- Model of CNC Machine: LongMill MK 2.5
- Rcnewcomb
- Vectric Archimage
- Posts: 6284
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: VCarve Pro Missing Modeling tab
What version are you running?
In V11.5 there was a modeling tab.
In V12 the modeling tools were moved to the Design tab
In V11.5 there was a modeling tab.
In V12 the modeling tools were moved to the Design tab
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- sharkcutup
- Vectric Wizard
- Posts: 3313
- Joined: Sat Mar 26, 2016 3:48 pm
- Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
- Location: U.S.A.
Re: VCarve Pro Missing Modeling tab
The Modeling Tab has been Renamed Components in Version 12.0 and Up See attached ---
And some of its features have been added to the Design Tab for convenience as noted in a previous post.
Sharkcutup
And some of its features have been added to the Design Tab for convenience as noted in a previous post.
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 12.010
YouTube Channel - Sharkcutup CNC
V-Carve Pro 12.010
-
- Posts: 25
- Joined: Tue Sep 17, 2024 9:13 pm
- Model of CNC Machine: LongMill MK 2.5
Re: VCarve Pro Missing Modeling tab
Thank you both for your thoughtful replies.
I am using VCarve Pro Version 12.
It took a lot of searching but I eventually found the modeling buttons.
Thanks again.
I am using VCarve Pro Version 12.
It took a lot of searching but I eventually found the modeling buttons.
Thanks again.