Took all of about 15 minutes to design, cut and see if it is going to work or not. Gotta love it.
Another Reason I Bought a Laser
-
TReischl
- Vectric Wizard
- Posts: 5080
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: Avid Type| Aspire V12
- Location: Leland NC
Another Reason I Bought a Laser
I have been "refurbishing" the cnc router. This piece is a standoff for a dust collection hose.
Took all of about 15 minutes to design, cut and see if it is going to work or not. Gotta love it.
Took all of about 15 minutes to design, cut and see if it is going to work or not. Gotta love it.
"If you see a good fight, get in it." Dr. Vernon Johns
-
Rcnewcomb
- Vectric Archimage
- Posts: 6177
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Another Reason I Bought a Laser
And all along I thought THIS was the reason 
- Attachments
-
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
TReischl
- Vectric Wizard
- Posts: 5080
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: Avid Type| Aspire V12
- Location: Leland NC
Re: Another Reason I Bought a Laser
That too!
(Just do not tell the ATF)
(Just do not tell the ATF)
"If you see a good fight, get in it." Dr. Vernon Johns
-
GeneMpls
- Vectric Craftsman
- Posts: 197
- Joined: Sun Nov 04, 2012 4:27 pm
- Model of CNC Machine: PRS Buddy48alpha ,4x6' 130w laser, Wazer
Re: Another Reason I Bought a Laser
The laser is the best rapid prototyping tool. Closely followed with a good 3D printer [Prusa]. Gene