I have been "refurbishing" the cnc router. This piece is a standoff for a dust collection hose.
Took all of about 15 minutes to design, cut and see if it is going to work or not. Gotta love it.
Another Reason I Bought a Laser
-
TReischl
- Vectric Wizard
- Posts: 5283
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: Avid Type| Aspire V12 | Rhino| 3 Bambus
- Location: Leland NC
Another Reason I Bought a Laser
You do not have the required permissions to view the files attached to this post.
"If you see a good fight, get in it." Dr. Vernon Johns
-
Rcnewcomb
- Vectric Archimage
- Posts: 6353
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Another Reason I Bought a Laser
And all along I thought THIS was the reason 
You do not have the required permissions to view the files attached to this post.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
TReischl
- Vectric Wizard
- Posts: 5283
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: Avid Type| Aspire V12 | Rhino| 3 Bambus
- Location: Leland NC
Re: Another Reason I Bought a Laser
That too!
(Just do not tell the ATF)
(Just do not tell the ATF)
"If you see a good fight, get in it." Dr. Vernon Johns
-
GeneMpls
- Vectric Craftsman
- Posts: 200
- Joined: Sun Nov 04, 2012 4:27 pm
- Model of CNC Machine: PRS Buddy48alpha ,4x6' 130w laser, Wazer
Re: Another Reason I Bought a Laser
The laser is the best rapid prototyping tool. Closely followed with a good 3D printer [Prusa]. Gene