Page 1 of 1
Sculptfun 33watt ultra
Posted: Thu Mar 14, 2024 6:46 pm
by 101179567skltd
looking for a postprocessor and i don't have a sniff! Can anybody help?
Re: Sculptfun 33watt ultra
Posted: Thu Mar 14, 2024 7:01 pm
by adze_cnc
It's less that brand of your CNC machine but rather what is the control software drives the CNC machine (e.g. GRBL, Mach3, etc.)
Re: Sculptfun 33watt ultra
Posted: Fri Mar 15, 2024 3:19 pm
by BDM
You have a GRBL based laser, so if you plan on using Vectric, I would recommend downloading the GRBL postprocessor from this site. A lot of good information on how to do it.
https://jtechphotonics.com/?p=19034
Re: Sculptfun 33watt ultra
Posted: Sat Mar 16, 2024 2:32 pm
by Vlad
It works very well. I use it all the time.