Having issues with my 10 w laser SRO and FRO
Chinese 6090gz cnc 10w Lasertree laser Mach 3 and Vectric pro
Tried everything I could think of no success.
Would be nice to find a post processor thar Vectric would save to machine.
Help please
Laser power and speed
- adze_cnc
- Vectric Wizard
- Posts: 4380
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008
- Location: Vancouver, BC, Canada
Re: Laser power and speed
Would be nice to know what your issues are and something about what the everything that you tried was.
It doesn’t work; I tried fixing it; what can I do isn’t must to work with.
It doesn’t work; I tried fixing it; what can I do isn’t must to work with.
Re: Laser power and speed
Got FRO to work thanks
Working on SRO
Ability to adjust Freq. or Power of Laser
Thanks for looking adze
Working on SRO
Ability to adjust Freq. or Power of Laser
Thanks for looking adze
Re: Laser power and speed
Not exactly sure what problems you're having, but this site has a lot of good information for getting Mach3 to work with a laser and they have Vectric post processors designed for lasers. https://jtechphotonics.com/ Look under upgrade instructions and software. Generally speaking, you set up Mach3 to use the spindle speed as an indicator of laser output and then when you set up a tool, you choose a spindle speed matching the laser power you want.