Feature Request - Separate laser Clearance & Plunge settings

Post Reply
TraylorHead
Posts: 4
Joined: Sat Jul 13, 2019 8:34 pm
Model of CNC Machine: Shark HD4 Ext (HD5 Gantry)
Location: Douglasville, Ga
Contact:

Feature Request - Separate laser Clearance & Plunge settings

Post by TraylorHead »

Hi, working within Aspire and projects with CNC and laser toolpaths I find that I have to change the material clearance and plunge, recalculate just the laser paths. This saves a good bit of time by removing the unnecessary movements when using my laser.

Could you add additional fields for laser clearance and plunge settings that would only be used when using a postprocessor for lasers?

Thanks
Jimmy
Design & build outside the box.

User avatar
TReischl
Vectric Wizard
Posts: 4567
Joined: Thu Jan 18, 2007 6:04 pm
Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
Location: Leland NC

Re: Feature Request - Separate laser Clearance & Plunge settings

Post by TReischl »

Requests like that are best sent direct to Vectric via email. They may or may not read your post here at all.
"If you see a good fight, get in it." Dr. Vernon Johns

AdamJ
Vectric Staff
Posts: 200
Joined: Wed Oct 16, 2013 2:24 pm
Model of CNC Machine: None

Re: Feature Request - Separate laser Clearance & Plunge settings

Post by AdamJ »

Hi Jimmy,

Thanks for the request. I can definitely see why you might want to do this. I'll talk to the Development team and record it in our Wishes list.

Cheers,
Adam

Post Reply