Sculptfun 33watt ultra
-
101179567skltd
- Posts: 10
- Joined: Fri Dec 16, 2016 3:18 am
- Model of CNC Machine: Home Made 24x36
Sculptfun 33watt ultra
looking for a postprocessor and i don't have a sniff! Can anybody help?
-
adze_cnc
- Vectric Wizard
- Posts: 5148
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008 (VCarve Pro v9.519)
- Location: Vancouver, BC, Canada
Re: Sculptfun 33watt ultra
It's less that brand of your CNC machine but rather what is the control software drives the CNC machine (e.g. GRBL, Mach3, etc.)
-
BDM
- Vectric Craftsman
- Posts: 171
- Joined: Tue Jan 04, 2011 3:52 pm
- Location: S.E. Michigan
Re: Sculptfun 33watt ultra
You have a GRBL based laser, so if you plan on using Vectric, I would recommend downloading the GRBL postprocessor from this site. A lot of good information on how to do it.
https://jtechphotonics.com/?p=19034
https://jtechphotonics.com/?p=19034
-
Vlad
- Posts: 8
- Joined: Sun Jul 03, 2022 2:40 pm
- Model of CNC Machine: Custom homemade
- Location: Reno, NV USA
Re: Sculptfun 33watt ultra
It works very well. I use it all the time.