Sculptfun 33watt ultra

Post Reply
101179567skltd
Posts: 10
Joined: Fri Dec 16, 2016 3:18 am
Model of CNC Machine: Home Made 24x36

Sculptfun 33watt ultra

Post by 101179567skltd »

looking for a postprocessor and i don't have a sniff! Can anybody help?

User avatar
adze_cnc
Vectric Wizard
Posts: 4474
Joined: Sat Jul 27, 2013 10:08 pm
Model of CNC Machine: AXYZ 4008
Location: Vancouver, BC, Canada

Re: Sculptfun 33watt ultra

Post by adze_cnc »

It's less that brand of your CNC machine but rather what is the control software drives the CNC machine (e.g. GRBL, Mach3, etc.)

BDM
Vectric Craftsman
Posts: 168
Joined: Tue Jan 04, 2011 3:52 pm
Location: S.E. Michigan

Re: Sculptfun 33watt ultra

Post by BDM »

You have a GRBL based laser, so if you plan on using Vectric, I would recommend downloading the GRBL postprocessor from this site. A lot of good information on how to do it.

https://jtechphotonics.com/?p=19034

Vlad
Posts: 8
Joined: Sun Jul 03, 2022 2:40 pm
Model of CNC Machine: Custom homemade
Location: Reno, NV USA

Re: Sculptfun 33watt ultra

Post by Vlad »

It works very well. I use it all the time.

Post Reply