Easy MDF Cabinet Door Maker

This forum is for users to submit their own gadgets to the community
Post Reply
User avatar
sharkcutup
Vectric Wizard
Posts: 1859
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Contact:

Re: Easy MDF Cabinet Door Maker

Post by sharkcutup »

Hi Jim -
I'm receiving a "No layer found with name = Door Scribe Lines" and "Door Flutes" with the attached settings. Though as far as I can tell, I'm not missing a toolpath or any design element.

Have I misinterpreted a setting/tool usage, perhaps? Thanks for the gadget and any help you can provide!
errormsg.jpg
Those messages are shown whenever you do not choose to have Scribe lines and Door Flutes on your doors. I usually just ignore those messages because I understand the gadget entirely to well now.

I noticed that you are using 11.7 Version of the Gadget. According to this thread 11.9 is the most recent from Jim.

Sharkcutup
hoganscnccrafts.com
V-Carve Help is Available!!!
PM me or Visit my website!
V-Carve Pro 11.503

User avatar
sharkcutup
Vectric Wizard
Posts: 1859
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Contact:

Re: Easy MDF Cabinet Door Maker

Post by sharkcutup »

Hello All,

I have been busy BETA TESTING and updating the Easy Door Maker Gadget. Found a few Issues and fixed a few issues recommended by other users of the gadget.

What is New:
• Fixed Oval Door with Crossing Flute Lines Hiccup --- variable "pty" was not recognized
• Fixed Double Arch Hiccup -- Second panel was not being created when creating doors up in length (say a 57" door)
• Standardized Flute and Fluting to "Flute"
• Standardized Inter to "Inner".
• Added note to "Inside Edge Milling" on User Interface.
• Added note to "Divider Width" on User Interface.
• And there are too many changes for me to remember them all.

Version 12.0

The Easy Install Steps:

1. Download the gadget EasyMDFDoorMaker.zip that is attached to this post.
2. Rename it from EasyMDFDoorMaker.zip to EasyMDFDoorMaker.vgadget
3. In Vectric Pro, Aspire, or Cut2D Pro click on Gadgets -> Install Gadget and navigate to where you downloaded the file to, select it and click Ok.

If successful, a pop up saying the gadget was installed and you should see EasyMDFDoorMaker is now in the Gadgets menu.

EasyMDFDoorMaker12.0.zip
(1.71 MiB) Downloaded 64 times
Rename to: EasyMDFDoorMaker12.0.vgadget

Please leave me some feedback . I hope you find it useful.

ATTACHMENTS
Screenshot 5.png
Screenshot 4.png
Screenshot 3.png
Screenshot 1.png
Screenshot 2.png
Sharkcutup (with permission From Jim Andi5000 of Jim Andi Gadgets)
hoganscnccrafts.com
V-Carve Help is Available!!!
PM me or Visit my website!
V-Carve Pro 11.503

User avatar
sharkcutup
Vectric Wizard
Posts: 1859
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Contact:

Re: Easy MDF Cabinet Door Maker

Post by sharkcutup »

Correction ---

Arched Style Hiccup --- Second panel was not being created when creating doors up in length (say a 57" door)
Screenshot 6.png
Sharkcutup
hoganscnccrafts.com
V-Carve Help is Available!!!
PM me or Visit my website!
V-Carve Pro 11.503

Post Reply