Line Bore gadget
-
- Posts: 12
- Joined: Wed Dec 06, 2017 9:35 pm
- Model of CNC Machine: felder HO8
Line Bore gadget
Hi All,
Is there a line bore gadget that will do a 32/64/96mm cc line bore for shelves
Thanks
Is there a line bore gadget that will do a 32/64/96mm cc line bore for shelves
Thanks
- jimandi5000
- Vectric Wizard
- Posts: 1056
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Line Bore gadget
Hello Brandon,
Sorry, I just found your post. Can you help me understand your question/request. What is a "line bore for 32/64/96mm cc line bore for shelves" ?
I think I could bang one out something if you can provide so specs.
I am thinking, is this for holes for shelf pins?
Sorry, I just found your post. Can you help me understand your question/request. What is a "line bore for 32/64/96mm cc line bore for shelves" ?
I think I could bang one out something if you can provide so specs.
I am thinking, is this for holes for shelf pins?
Thanks,
Jim
Jim
- jimandi5000
- Vectric Wizard
- Posts: 1056
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Line Bore gadget
Hello Brandon,
Sorry, I just found your post. Can you help me understand your question/request. What is a "line bore for 32/64/96mm cc line bore for shelves" ?
I think I could bang one out something if you can provide so specs.
I am thinking, is this for holes for shelf pins?
Sorry, I just found your post. Can you help me understand your question/request. What is a "line bore for 32/64/96mm cc line bore for shelves" ?
I think I could bang one out something if you can provide so specs.
I am thinking, is this for holes for shelf pins?
Thanks,
Jim
Jim
-
- Posts: 12
- Joined: Wed Dec 06, 2017 9:35 pm
- Model of CNC Machine: felder HO8
Re: Line Bore gadget
Hi jim,
yes its for doing shelf pins or Festool MFT tables, handle jig making
Basically the software on my CNC will do it but its clunky takes forever and is not easy to edit.
Also the Array copy tool doesnt work as it works from the space in the middle of the holes where as i need a measurement from the centre to the centre also it to reference an edge or the centre of the board. if you could help this would be great
Thanks
Brandon
yes its for doing shelf pins or Festool MFT tables, handle jig making
Basically the software on my CNC will do it but its clunky takes forever and is not easy to edit.
Also the Array copy tool doesnt work as it works from the space in the middle of the holes where as i need a measurement from the centre to the centre also it to reference an edge or the centre of the board. if you could help this would be great
Thanks
Brandon
-
- Posts: 33
- Joined: Sun Jan 29, 2017 2:32 pm
- Model of CNC Machine: Shopbot PRS Alpha 120-60
Re: Line Bore gadget
jimandi5000 wrote: ↑Thu May 14, 2020 5:52 amHello Brandon,
Sorry, I just found your post. Can you help me understand your question/request. What is a "line bore for 32/64/96mm cc line bore for shelves" ?
I think I could bang one out something if you can provide so specs.
I am thinking, is this for holes for shelf pins?
Jim,
Yes it is for shelf pins, it is also for hinge mounting plates, drawer runners and construction holes..
Just Google 32mm System, will give you a basic understanding of cabinet construction, if you
have any question just ask away.
Paul
- Adrian
- Vectric Archimage
- Posts: 14680
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Line Bore gadget
I'm not seeing why the Array Copy tool can't be used here. The diameter of the holes is known and the spacing is known.Brandon Collins wrote: ↑Mon Jun 29, 2020 4:25 pmH
Also the Array copy tool doesnt work as it works from the space in the middle of the holes where as i need a measurement from the centre to the centre also it to reference an edge or the centre of the board.
Draw one 5mm or 8mm circle and then an array copy with columns (for horizontal) or rows (for vertical) with offset of 32mm.
To do the reference group the line of circles of and use the Move command set to absolute and type the edge offset value.
- jimandi5000
- Vectric Wizard
- Posts: 1056
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Line Bore gadget
Hi Paul,Salmon's lair wrote: ↑Mon Jun 29, 2020 6:30 pmjimandi5000 wrote: ↑Thu May 14, 2020 5:52 amHello Brandon,
Sorry, I just found your post. Can you help me understand your question/request. What is a "line bore for 32/64/96mm cc line bore for shelves" ?
I think I could bang one out something if you can provide so specs.
I am thinking, is this for holes for shelf pins?
Jim,
Yes it is for shelf pins, it is also for hinge mounting plates, drawer runners and construction holes..
Just Google 32mm System, will give you a basic understanding of cabinet construction, if you
have any question just ask away.
Paul
I will write you a gadget today. I will post it ASAP.
Thanks,
Jim
Jim
- jimandi5000
- Vectric Wizard
- Posts: 1056
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Line Bore gadget
jimandi5000 wrote: ↑Tue Jun 30, 2020 4:29 pmHi Paul,Salmon's lair wrote: ↑Mon Jun 29, 2020 6:30 pmjimandi5000 wrote: ↑Thu May 14, 2020 5:52 amHello Brandon,
Sorry, I just found your post. Can you help me understand your question/request. What is a "line bore for 32/64/96mm cc line bore for shelves" ?
I think I could bang one out something if you can provide so specs.
I am thinking, is this for holes for shelf pins?
Jim,
Yes it is for shelf pins, it is also for hinge mounting plates, drawer runners and construction holes..
Just Google 32mm System, will give you a basic understanding of cabinet construction, if you
have any question just ask away.
Paul
I will write you a gadget today. I will post it ASAP.
Hi Paul,
I have been delayed on writing the Gadget. I have started writing the design requirements and I have some questions on how the gadget should work?
1. Do I draw the panel and holes?
2. Do you want Toolpaths?
3. If Toolpaths, will the holes be drilled or pocketed the 5mm pin holes?
4. Do you want the 8mm construction holes?
5. If Toolpaths for construction holes, will the holes be drilled or pocketed?
Please let me know.
Thanks,
Jim
Jim
- jimandi5000
- Vectric Wizard
- Posts: 1056
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Line Bore gadget
Hi All,
I have been busy working on a number of items.
Here is a Ver 1.0 of a 32mm gadget tool thing.
It is not done.... but I would like to know if this is the right direction.
Let me know if I should spend more time on on this or not.
I have been busy working on a number of items.
Here is a Ver 1.0 of a 32mm gadget tool thing.
It is not done.... but I would like to know if this is the right direction.
Let me know if I should spend more time on on this or not.
- Attachments
-
- Easy32mmSystem.zip
- Change the name to Easy32mmSystem.vgadget
- (27.1 KiB) Downloaded 236 times
Thanks,
Jim
Jim
-
- Posts: 5
- Joined: Mon Apr 06, 2020 8:59 pm
- Model of CNC Machine: Laguna Smartshop
Re: Line Bore gadget
I get an error. "attempt to call a nil value"
Re: Line Bore gadget
Good Morning!
This seems like a nice tool. It installs fine, but when I go to use it I get the same error message described in the previous post in 10.5 and 11. Any chance of getting this fixed?
Thank you for whatever help you can provide,
Jim
This seems like a nice tool. It installs fine, but when I go to use it I get the same error message described in the previous post in 10.5 and 11. Any chance of getting this fixed?
Thank you for whatever help you can provide,
Jim
- jimandi5000
- Vectric Wizard
- Posts: 1056
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Line Bore gadget
Hi Webb,
What is the error you are getting? Can you post a screen shot of the error?
Thanks,
Jim
Jim
- jimandi5000
- Vectric Wizard
- Posts: 1056
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Line Bore gadget
Hello All,
Here is Version 3.0
Supports: Vectric Version 10 +
Here is Version 3.0
Supports: Vectric Version 10 +
- Attachments
-
- Easy32mmSystemVer3.00.zip
- Rename to: Easy32mmSystemVer3.00.vgadget
- (27.23 KiB) Downloaded 173 times
Thanks,
Jim
Jim
Re: Line Bore gadget
"Attempt to call a nil value" Hope this helps!