Easy Euro Door Hinges Maker
- jimandi5000
- Vectric Wizard
- Posts: 1056
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Easy Euro Door Hinges Maker
Hi all,
I hope you are doing well today.
Just completed a new gadget the "Euro style door hinge pocket maker. To use the tool select the outer edge (closed polyline) of the door and then start the Gadget the dialog will let you put hinges on any side of the door and you can put 2, 3, or 4 hinges on the door. Enter your hinge dimensions on the dialog and they will be saved and reloaded the next time you run the gadget. I looked at the Blum site https://www.blum.com/us/en/products/hin ... /overview/ to get the hole sizes and spacing. Have a look and I need some feedback.
I hope you are doing well today.
Just completed a new gadget the "Euro style door hinge pocket maker. To use the tool select the outer edge (closed polyline) of the door and then start the Gadget the dialog will let you put hinges on any side of the door and you can put 2, 3, or 4 hinges on the door. Enter your hinge dimensions on the dialog and they will be saved and reloaded the next time you run the gadget. I looked at the Blum site https://www.blum.com/us/en/products/hin ... /overview/ to get the hole sizes and spacing. Have a look and I need some feedback.
- Attachments
-
- EasyCabinetTools.zip
- (1.38 MiB) Downloaded 292 times
-
- Hinge2.jpg (3.11 KiB) Viewed 18527 times
Thanks,
Jim
Jim
-
- Vectric Wizard
- Posts: 411
- Joined: Thu Apr 06, 2017 3:07 am
- Model of CNC Machine: Camaster Stinger SR24
- Location: Addison, PA
Re: Easy Euro Door Hinges Maker
Holy cow, Jim, this looks really cool! You have been busy cranking out some very useful stuff to the forum members.
Im going to download this and see what it does. I only have a small 2 x4’ machine but for hanging cabinet doors this looks very promising. Thank you so much for your time and talent and willingness to share!
Im going to download this and see what it does. I only have a small 2 x4’ machine but for hanging cabinet doors this looks very promising. Thank you so much for your time and talent and willingness to share!
Joe
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
- jimandi5000
- Vectric Wizard
- Posts: 1056
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Easy Euro Door Hinges Maker
You are so welcome... I physical cannot get in the shop right now so I am trying to learn how to write Vcarve gadgets. If you have a Gadget need... let me know.Holzarbeiter wrote:Holy cow, Jim, this looks really cool! You have been busy cranking out some very useful stuff to the forum members.
Im going to download this and see what it does. I only have a small 2 x4’ machine but for hanging cabinet doors this looks very promising. Thank you so much for your time and talent and willingness to share!
Thanks,
Jim
Jim
-
- Vectric Wizard
- Posts: 411
- Joined: Thu Apr 06, 2017 3:07 am
- Model of CNC Machine: Camaster Stinger SR24
- Location: Addison, PA
Re: Easy Euro Door Hinges Maker
jimandi5000 wrote:You are so welcome... I physical cannot get in the shop right now so I am trying to learn how to write Vcarve gadgets. If you have a Gadget need... let me know.Holzarbeiter wrote:Holy cow, Jim, this looks really cool! You have been busy cranking out some very useful stuff to the forum members.
Im going to download this and see what it does. I only have a small 2 x4’ machine but for hanging cabinet doors this looks very promising. Thank you so much for your time and talent and willingness to share!
Well, off the top of my head I can't think of any....but I will consider your offer a challenge!
Joe
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
- jimandi5000
- Vectric Wizard
- Posts: 1056
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Easy Euro Door Hinges Maker
My neighbor was putting cabinets in his shop and asked if he could run some doors on my mill. So I broke out the door/Hinge gadget and he gave me some feedback on how to improve it.
So, here is the 4.0 upgrade...
I've already started upgrading all the user interfaces, Wiki Help and user videos to all of the Easy gadgets and will post them as I complete them.
A quick how to video.
https://youtu.be/OgiFH2GrLtY
So, here is the 4.0 upgrade...
I've already started upgrading all the user interfaces, Wiki Help and user videos to all of the Easy gadgets and will post them as I complete them.
A quick how to video.
https://youtu.be/OgiFH2GrLtY
- Attachments
-
- EasyEuroHingeMakerVer4.0.zip
- Rename to EasyEuroHingeMaker.vgadget
- (51.58 KiB) Downloaded 204 times
Thanks,
Jim
Jim
-
- Vectric Apprentice
- Posts: 66
- Joined: Wed Jul 16, 2014 5:49 am
- Model of CNC Machine: HomeBuilt
Re: Easy Euro Door Hinges Maker - Error
Hi Jim,
Different error. When I pressed the Help button after opening the gadget I received this error. Is it Windows config problem or something missing in the gadget causing this? Or?
Thanks,
Andy
Different error. When I pressed the Help button after opening the gadget I received this error. Is it Windows config problem or something missing in the gadget causing this? Or?
Thanks,
Andy
- jimandi5000
- Vectric Wizard
- Posts: 1056
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
- jimandi5000
- Vectric Wizard
- Posts: 1056
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Easy Euro Door Hinges Maker - Error
What happens when you press the "Yes" button?
Thanks,
Jim
Jim
- jimandi5000
- Vectric Wizard
- Posts: 1056
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Easy Euro Door Hinges Maker - Error
jimandi5000 wrote: ↑Mon Jun 15, 2020 9:05 pmQuestions:
1. What happens when you press the "Yes" button?
2. Is it only the About button
Thanks,
Jim
Jim
-
- Vectric Apprentice
- Posts: 66
- Joined: Wed Jul 16, 2014 5:49 am
- Model of CNC Machine: HomeBuilt
Re: Easy Euro Door Hinges Maker - Error
jimandi5000 wrote: ↑Mon Jun 15, 2020 9:09 pmWhen I press the yes or the no nothing visibly happens. All other button or dialog options function as expected. When I press ok the results are generated.jimandi5000 wrote: ↑Mon Jun 15, 2020 9:05 pmQuestions:
1. What happens when you press the "Yes" button?
2. Is it only the About button
So, it appears only the "Help" button. BTW, the help on any of screens does the same thing.
- jimandi5000
- Vectric Wizard
- Posts: 1056
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Easy Euro Door Hinges Maker - Error
AcBCDN wrote: ↑Tue Jun 16, 2020 12:07 amGREAT!!! I know how to address this issue.jimandi5000 wrote: ↑Mon Jun 15, 2020 9:09 pmWhen I press the yes or the no nothing visibly happens. All other button or dialog options function as expected. When I press ok the results are generated.jimandi5000 wrote: ↑Mon Jun 15, 2020 9:05 pm
Questions:
1. What happens when you press the "Yes" button?
2. Is it only the About button
So, it appears only the "Help" button. BTW, the help on any of screens does the same thing.
Thanks,
Jim
Jim
- jimandi5000
- Vectric Wizard
- Posts: 1056
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Easy Euro Door Hinges Maker
Here is the 4.01 hot fix...
Version 4.01 will fix the following:
1. Removed and replaced Java script to open new web page to show the help with html code to avoid the Reg issue
2. Fixed the Hinge offset location if overlap is added.
Version 4.01 will fix the following:
1. Removed and replaced Java script to open new web page to show the help with html code to avoid the Reg issue
2. Fixed the Hinge offset location if overlap is added.
- Attachments
-
- EasyHingeMaker.zip
- Rename to EasyEuroHingeMaker.vgadget
- (51.55 KiB) Downloaded 189 times
Thanks,
Jim
Jim
-
- Vectric Apprentice
- Posts: 66
- Joined: Wed Jul 16, 2014 5:49 am
- Model of CNC Machine: HomeBuilt
Re: Easy Euro Door Hinges Maker
Sorry to report that the exact same error occurred with the "Help" button.jimandi5000 wrote: ↑Tue Jun 16, 2020 2:09 amHere is the 4.01 hot fix...
Version 4.01 will fix the following:
1. Removed and replaced Java script to open new web page to show the help with html code to avoid the Reg issue
2. Fixed the Hinge offset location if overlap is added.
- jimandi5000
- Vectric Wizard
- Posts: 1056
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Easy Euro Door Hinges Maker
Ok, let me have a look tonight.AcBCDN wrote: ↑Tue Jun 16, 2020 9:25 pmSorry to report that the exact same error occurred with the "Help" button.jimandi5000 wrote: ↑Tue Jun 16, 2020 2:09 amHere is the 4.01 hot fix...
Version 4.01 will fix the following:
1. Removed and replaced Java script to open new web page to show the help with html code to avoid the Reg issue
2. Fixed the Hinge offset location if overlap is added.
Thanks,
Jim
Jim
- jimandi5000
- Vectric Wizard
- Posts: 1056
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: Easy Euro Door Hinges Maker
Okay... Version 4.02
Removed the HTML code and moved it to CSS.
Please let me know if it works.
Removed the HTML code and moved it to CSS.
Please let me know if it works.
- Attachments
-
- EasyHingeMaker.zip
- Rename to EasyHingeMaker.vgadget
- (51.66 KiB) Downloaded 224 times
Thanks,
Jim
Jim