Easy Cabinet Maker

This forum is for users to submit their own gadgets to the community
Post Reply
User avatar
jimandi5000
Vectric Wizard
Posts: 594
Joined: Wed Mar 11, 2015 6:50 pm
Model of CNC Machine: Home Made 60 x 120
Location: North Houston Tx.

Re: Easy Cabinet Maker

Post by jimandi5000 »

dyn0bill wrote:
Fri Feb 26, 2021 5:41 am
Where do I get the latest rev of Easy Cab?

Thanks :?:
This Version is for Version 10 or higher of Vectric?
Attachments
EasyCabinetMaker10-8.1.zip
Rename to EasyCabinetMaker10.vgadget
(37.99 KiB) Downloaded 59 times
Thanks,
Jim

User avatar
jimandi5000
Vectric Wizard
Posts: 594
Joined: Wed Mar 11, 2015 6:50 pm
Model of CNC Machine: Home Made 60 x 120
Location: North Houston Tx.

Re: Easy Cabinet Maker

Post by jimandi5000 »

Hello All,

I have made an update to the Easy Cabinet Maker. Version 10-8.2 has a new error trap. if the user forgets to select a Project Path, the error trap will prompt the user with a dialog box for the user to enter the Project Path or navigate to it. this will allow the gadget to run.

Your feedback is welcome.

:D
Attachments
Screenshot 2021-03-09 151601.png
Screenshot 2021-03-09 151641.png
Screenshot 2021-03-09 151654.png
Screenshot 2021-03-09 151713.png
EasyCabinetMaker10-8.2.zip
Rename to EasyCabinetMaker10-8.2.vgadget
(39.53 KiB) Downloaded 66 times
Thanks,
Jim

PRO4824
Vectric Apprentice
Posts: 92
Joined: Tue Apr 04, 2017 11:44 pm
Model of CNC Machine: AVID PRO4824
Location: West Kentucky USA

Re: Easy Cabinet Maker

Post by PRO4824 »

That's a great gadget. When you get to the final update, it'll be time to start working on the Easy car audio Speaker Box maker! 🙂👍
Isaiah 41-10

User avatar
jimandi5000
Vectric Wizard
Posts: 594
Joined: Wed Mar 11, 2015 6:50 pm
Model of CNC Machine: Home Made 60 x 120
Location: North Houston Tx.

Re: Easy Cabinet Maker

Post by jimandi5000 »

PRO4824 wrote:
Wed Mar 10, 2021 3:55 am
That's a great gadget. When you get to the final update, it'll be time to start working on the Easy car audio Speaker Box maker! 🙂👍
Sure thing!!! do you have a drawing of the speaker box? :)
Thanks,
Jim

PRO4824
Vectric Apprentice
Posts: 92
Joined: Tue Apr 04, 2017 11:44 pm
Model of CNC Machine: AVID PRO4824
Location: West Kentucky USA

Re: Easy Cabinet Maker

Post by PRO4824 »

No Sir, I don't make them but it's a big industry for cnc owners to get into.
If I had a cool gadget, I might start. 😁
Isaiah 41-10

dyn0bill
Posts: 13
Joined: Sun Feb 21, 2021 8:10 am
Model of CNC Machine: EZ Route 4x8

Re: Easy Cabinet Maker

Post by dyn0bill »

Thanks for the update. I put all my info in to do a 11" wide wall cabinet. When I tell it "OK" it goes away and nothing happens? Do I not have it installed correctly?

User avatar
jimandi5000
Vectric Wizard
Posts: 594
Joined: Wed Mar 11, 2015 6:50 pm
Model of CNC Machine: Home Made 60 x 120
Location: North Houston Tx.

Re: Easy Cabinet Maker

Post by jimandi5000 »

dyn0bill wrote:
Thu Mar 11, 2021 5:17 am
Thanks for the update. I put all my info in to do a 11" wide wall cabinet. When I tell it "OK" it goes away and nothing happens? Do I not have it installed correctly?
Can you post a screen shot of the main screen showing the cabinet size? I tried it and it worked fine for me.
Thanks,
Jim

dyn0bill
Posts: 13
Joined: Sun Feb 21, 2021 8:10 am
Model of CNC Machine: EZ Route 4x8

Re: Easy Cabinet Maker

Post by dyn0bill »

Thanks Jim,

Just for a hoot I deleted the registry key and ran it with the defaults and it worked. I will try the 11" wide this evening and see what happens.

What is the best way to remove and install your gadget?

Willy

dyn0bill
Posts: 13
Joined: Sun Feb 21, 2021 8:10 am
Model of CNC Machine: EZ Route 4x8

Re: Easy Cabinet Maker

Post by dyn0bill »

A couple of screen shots. My setup and after I press the "OK".

Thanks
Attachments
Snip_One.PNG
I zoomed out.
I zoomed out.

User avatar
jimandi5000
Vectric Wizard
Posts: 594
Joined: Wed Mar 11, 2015 6:50 pm
Model of CNC Machine: Home Made 60 x 120
Location: North Houston Tx.

Re: Easy Cabinet Maker

Post by jimandi5000 »

dyn0bill wrote:
Fri Mar 12, 2021 2:00 am
A couple of screen shots. My setup and after I press the "OK".

Thanks
What version are you running?
Attachments
it works for me...
it works for me...
Thanks,
Jim

dyn0bill
Posts: 13
Joined: Sun Feb 21, 2021 8:10 am
Model of CNC Machine: EZ Route 4x8

Re: Easy Cabinet Maker

Post by dyn0bill »

Jim,

Would you send me the 11" crv file? My material is 1/2". I still can't get it to work. How do I completely remove it and try a reinstall?

Thanks,

Willy

User avatar
jimandi5000
Vectric Wizard
Posts: 594
Joined: Wed Mar 11, 2015 6:50 pm
Model of CNC Machine: Home Made 60 x 120
Location: North Houston Tx.

Re: Easy Cabinet Maker

Post by jimandi5000 »

dyn0bill wrote:
Sat Mar 13, 2021 4:05 am
Jim,

Would you send me the 11" crv file? My material is 1/2". I still can't get it to work. How do I completely remove it and try a reinstall?

Thanks,

Willy
Hi Willy,

I found the error. Can you try this link to the download page?

http://www.jimandi.com/EasyGadgets/Easy ... Maker.html

please let me know.
Thanks,
Jim

dyn0bill
Posts: 13
Joined: Sun Feb 21, 2021 8:10 am
Model of CNC Machine: EZ Route 4x8

Re: Easy Cabinet Maker

Post by dyn0bill »

Thanks Jim,

It is working!

My CNC cutting bed is 48 wide by 96" tall. How do I tell Easy Cabinet to rotate 90 degrees +/-?

Is the only option to do it manually?

Willy
48x96
48x96

User avatar
jimandi5000
Vectric Wizard
Posts: 594
Joined: Wed Mar 11, 2015 6:50 pm
Model of CNC Machine: Home Made 60 x 120
Location: North Houston Tx.

Re: Easy Cabinet Maker

Post by jimandi5000 »

dyn0bill wrote:
Sat Mar 13, 2021 6:57 am
Thanks Jim,

It is working!

My CNC cutting bed is 48 wide by 96" tall. How do I tell Easy Cabinet to rotate 90 degrees +/-?

Is the only option to do it manually?

Willy20210219_213516.jpg
Yes, you need to do it manually but I can add that to the code.

Give me some time to figure it out.
Thanks,
Jim

User avatar
jimandi5000
Vectric Wizard
Posts: 594
Joined: Wed Mar 11, 2015 6:50 pm
Model of CNC Machine: Home Made 60 x 120
Location: North Houston Tx.

Re: Easy Cabinet Maker

Post by jimandi5000 »

dyn0bill wrote:
Sat Mar 13, 2021 6:57 am
Thanks Jim,

It is working!

My CNC cutting bed is 48 wide by 96" tall. How do I tell Easy Cabinet to rotate 90 degrees +/-?

Is the only option to do it manually?

Willy20210219_213516.jpg
Yes, you need to do it manually but I can add that to the code.

Give me some time to figure it out.
Thanks,
Jim

Post Reply