Easy Cabinet Maker

[jimandi5000]

Where do I get the latest rev of Easy Cab?

Thanks

This Version is for Version 10 or higher of Vectric?

[jimandi5000]

Hello All,

I have made an update to the Easy Cabinet Maker. Version 10-8.2 has a new error trap. if the user forgets to select a Project Path, the error trap will prompt the user with a dialog box for the user to enter the Project Path or navigate to it. this will allow the gadget to run.

Your feedback is welcome.

[PRO4824]

That's a great gadget. When you get to the final update, it'll be time to start working on the Easy car audio Speaker Box maker!

[jimandi5000]

That's a great gadget. When you get to the final update, it'll be time to start working on the Easy car audio Speaker Box maker!

Sure thing!!! do you have a drawing of the speaker box?

[PRO4824]

No Sir, I don't make them but it's a big industry for cnc owners to get into.
If I had a cool gadget, I might start.

[dyn0bill]

Thanks for the update. I put all my info in to do a 11" wide wall cabinet. When I tell it "OK" it goes away and nothing happens? Do I not have it installed correctly?

[jimandi5000]

Thanks for the update. I put all my info in to do a 11" wide wall cabinet. When I tell it "OK" it goes away and nothing happens? Do I not have it installed correctly?

Can you post a screen shot of the main screen showing the cabinet size? I tried it and it worked fine for me.

[dyn0bill]

Thanks Jim,

Just for a hoot I deleted the registry key and ran it with the defaults and it worked. I will try the 11" wide this evening and see what happens.

What is the best way to remove and install your gadget?

Willy

[dyn0bill]

A couple of screen shots. My setup and after I press the "OK".

Thanks

[jimandi5000]

A couple of screen shots. My setup and after I press the "OK".

Thanks

What version are you running?

[dyn0bill]

Jim,

Would you send me the 11" crv file? My material is 1/2". I still can't get it to work. How do I completely remove it and try a reinstall?

Thanks,

Willy

[jimandi5000]

Jim,

Would you send me the 11" crv file? My material is 1/2". I still can't get it to work. How do I completely remove it and try a reinstall?

Thanks,

Willy

Hi Willy,

I found the error. Can you try this link to the download page?

http://www.jimandi.com/EasyGadgets/Easy ... Maker.html

please let me know.

[dyn0bill]

Thanks Jim,

It is working!

My CNC cutting bed is 48 wide by 96" tall. How do I tell Easy Cabinet to rotate 90 degrees +/-?

Is the only option to do it manually?

Willy

48x96

[jimandi5000]

Thanks Jim,

It is working!

My CNC cutting bed is 48 wide by 96" tall. How do I tell Easy Cabinet to rotate 90 degrees +/-?

Is the only option to do it manually?

Willy20210219_213516.jpg

Yes, you need to do it manually but I can add that to the code.

Give me some time to figure it out.

[jimandi5000]

Thanks Jim,

It is working!

My CNC cutting bed is 48 wide by 96" tall. How do I tell Easy Cabinet to rotate 90 degrees +/-?

Is the only option to do it manually?

Willy20210219_213516.jpg

Yes, you need to do it manually but I can add that to the code.

Give me some time to figure it out.