Easy Euro Door Hinges Maker

This forum is for users to submit their own gadgets to the community
Post Reply
User avatar
jimandi5000
Vectric Wizard
Posts: 330
Joined: Wed Mar 11, 2015 6:50 pm
Model of CNC Machine: Home Made 60 x 120
Location: North Houston Tx.

Easy Euro Door Hinges Maker

Post by jimandi5000 »

Hi all,
I hope you are doing well today.

Just completed a new gadget the "Euro style door hinge pocket maker. To use the tool select the outer edge (closed polyline) of the door and then start the Gadget the dialog will let you put hinges on any side of the door and you can put 2, 3, or 4 hinges on the door. Enter your hinge dimensions on the dialog and they will be saved and reloaded the next time you run the gadget. I looked at the Blum site https://www.blum.com/us/en/products/hin ... /overview/ to get the hole sizes and spacing. Have a look and I need some feedback.
Attachments
Hinge1.jpg
Hinge3.jpg
Hinge4.jpg
EasyCabinetTools.zip
(1.38 MiB) Downloaded 67 times
Borning_Patterns.jpg
Hinge2.jpg
Hinge2.jpg (3.11 KiB) Viewed 13 times
Thanks,
Jim

Holzarbeiter
Vectric Craftsman
Posts: 164
Joined: Thu Apr 06, 2017 3:07 am
Model of CNC Machine: Camaster Stinger SR24
Location: Addison, PA

Re: Easy Euro Door Hinges Maker

Post by Holzarbeiter »

Holy cow, Jim, this looks really cool! You have been busy cranking out some very useful stuff to the forum members.
Im going to download this and see what it does. I only have a small 2 x4’ machine but for hanging cabinet doors this looks very promising. Thank you so much for your time and talent and willingness to share!
Joe

I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.

User avatar
jimandi5000
Vectric Wizard
Posts: 330
Joined: Wed Mar 11, 2015 6:50 pm
Model of CNC Machine: Home Made 60 x 120
Location: North Houston Tx.

Re: Easy Euro Door Hinges Maker

Post by jimandi5000 »

Holzarbeiter wrote:Holy cow, Jim, this looks really cool! You have been busy cranking out some very useful stuff to the forum members.
Im going to download this and see what it does. I only have a small 2 x4’ machine but for hanging cabinet doors this looks very promising. Thank you so much for your time and talent and willingness to share!
You are so welcome... I physical cannot get in the shop right now so I am trying to learn how to write Vcarve gadgets. If you have a Gadget need... let me know.
Thanks,
Jim

Holzarbeiter
Vectric Craftsman
Posts: 164
Joined: Thu Apr 06, 2017 3:07 am
Model of CNC Machine: Camaster Stinger SR24
Location: Addison, PA

Re: Easy Euro Door Hinges Maker

Post by Holzarbeiter »

jimandi5000 wrote:
Holzarbeiter wrote:Holy cow, Jim, this looks really cool! You have been busy cranking out some very useful stuff to the forum members.
Im going to download this and see what it does. I only have a small 2 x4’ machine but for hanging cabinet doors this looks very promising. Thank you so much for your time and talent and willingness to share!
You are so welcome... I physical cannot get in the shop right now so I am trying to learn how to write Vcarve gadgets. If you have a Gadget need... let me know.

Well, off the top of my head I can't think of any....but I will consider your offer a challenge!
Joe

I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.

Post Reply