Dove Carving for Church Prayer Room
- Rcnewcomb
- Vectric Archimage
- Posts: 5915
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Dove Carving for Church Prayer Room
This carving was done for a church that was building a prayer room. The photo was taken before the lighting was installed that would accent the shadows of the carving:
-
- Vectric Craftsman
- Posts: 175
- Joined: Thu Oct 13, 2005 11:28 pm
- Rcnewcomb
- Vectric Archimage
- Posts: 5915
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
If you have the VectorArt Mega Collection Vol 1 the dove and olive branch is on page 168, image 9.
http://www.vectorart.com/Mega_Collection/
I purchased mine through Sign Warehouse
http://www.signwarehouse.com/
http://www.vectorart.com/Mega_Collection/
I purchased mine through Sign Warehouse
http://www.signwarehouse.com/
-
- Vectric Wizard
- Posts: 4797
- Joined: Thu May 18, 2006 3:24 pm
- Model of CNC Machine: ShopBot
- Location: North Carolina
Dan,
If you don't own the entire collection, you can purchase individual images directly from the VectorArt website for $4.00 each.
You will find the Dove at this link:
http://www.vectorart.com/store/index.cf ... 011#A38717
Tim
If you don't own the entire collection, you can purchase individual images directly from the VectorArt website for $4.00 each.
You will find the Dove at this link:
http://www.vectorart.com/store/index.cf ... 011#A38717
Tim
- Wemme
- Vectric Wizard
- Posts: 510
- Joined: Mon Jan 30, 2006 6:31 am
- Location: Christchurch, New Zealand
I've purchase single images in the past with no problems from the Vectorart site.
Regards
Bart
Regards
Bart
tmerrill wrote:Dan,
If you don't own the entire collection, you can purchase individual images directly from the VectorArt website for $4.00 each.
You will find the Dove at this link:
http://www.vectorart.com/store/index.cf ... 011#A38717
Tim
Thank you
I found and bought the image of the dove. This was done on my last sample piece of Spectratech Color MDF The veneer I applied was bird’s-eye maple. It still needs a few more coats of lacquer and a matte finish for the final coat.
As for Great Lakes color MDF I emailed them about the problems we are having getting their color MDF If anyone knows of a place in Mi or Wi that carries color MDF would you let me know.If I have to I will have them cut it in half and UPS it.
Dan
I found and bought the image of the dove. This was done on my last sample piece of Spectratech Color MDF The veneer I applied was bird’s-eye maple. It still needs a few more coats of lacquer and a matte finish for the final coat.
As for Great Lakes color MDF I emailed them about the problems we are having getting their color MDF If anyone knows of a place in Mi or Wi that carries color MDF would you let me know.If I have to I will have them cut it in half and UPS it.
Dan
I have a phone number of a place in the detroit area that is supposed to carry the colored mdf. My samples should be in any day now and I plan to try and get a few sheets to try out soon. You can e-mail me at kevinlockwoodatverizondotcom not sure where your located but maybe we can work somthin out.
- RoutnAbout
- Vectric Wizard
- Posts: 2087
- Joined: Mon Sep 19, 2005 11:09 pm
- Model of CNC Machine: 24x18 Desktop
- Location: North Manchester, Indiana