Candle holder, Thank you Khalid

An area to upload images of pieces cut using VCarve Pro
Post Reply
User avatar
lovebugjunkie
Vectric Wizard
Posts: 351
Joined: Tue Jul 10, 2007 1:12 am
Model of CNC Machine: Romaxx HS1
Location: USA

Candle holder, Thank you Khalid

Post by lovebugjunkie »

Finished this last night, stole the idea from Khalid who posted it. (his looked much better)
Thank you Khalid
Now the wife wants some that only hold three candles.

Image
Image
Image

User avatar
swaggs21
Vectric Craftsman
Posts: 100
Joined: Wed Aug 27, 2008 2:43 pm
Location: Rock Lake, WV
Contact:

Re: Candle holder, Thank you Khalid

Post by swaggs21 »

Very nice :D

Don't see the original post, can you link?
-Chris

The new woodworking site:
http://www.33degreeseastww.com

User avatar
lovebugjunkie
Vectric Wizard
Posts: 351
Joined: Tue Jul 10, 2007 1:12 am
Model of CNC Machine: Romaxx HS1
Location: USA

Re: Candle holder, Thank you Khalid

Post by lovebugjunkie »

Thanks for the complement swaggs21.

Thought it was on this forum but found it here.

http://www.cnczone.com/forums/showthrea ... ght=Khalid

I had to change it to make it a bit smaller due to my cutting area. I also put tabs on the
“candle shelfs” and pockets in the sides to help deep things in place and centered where I wanted them.

Khalid
Vectric Craftsman
Posts: 232
Joined: Thu Jun 19, 2008 1:01 pm
Location: Pakistan

Re: Candle holder, Thank you Khalid

Post by Khalid »

Wow man..what a good job u have done on it..;) Thats really a great candle holder..Now i also have to machine it;)
Thanks for posting great pics :)

User avatar
Paul_n
Vectric Wizard
Posts: 316
Joined: Mon Aug 22, 2005 1:12 am
Model of CNC Machine: ShopBot PR96
Location: Cartersville, Georgia

Corian Candle Holder, Thanks to Khalid

Post by Paul_n »

Here is my first attempt at the candle holder, from Khalid..

This is cut from corian, with a few minor changes.

Paul N
Attachments
CS01.jpg
CS03.jpg
CS04.jpg

User avatar
Greasetattoo
Vectric Wizard
Posts: 854
Joined: Sat Mar 24, 2007 3:14 pm
Location: Saint Paul, Minnesota
Contact:

Re: Candle holder, Thank you Khalid

Post by Greasetattoo »

Sweet Paul!

What did you glue them together with??
Superglue??


I went to a bookstore and asked the saleswoman, "Where's the self-help section?" She said if she told me, it would defeat the purpose.

User avatar
Paul_n
Vectric Wizard
Posts: 316
Joined: Mon Aug 22, 2005 1:12 am
Model of CNC Machine: ShopBot PR96
Location: Cartersville, Georgia

Re: Candle holder, Thank you Khalid

Post by Paul_n »

Thanks Grease....

I used "Devcon" 2-Ton Epoxy, which I've used on other corian projects,
and it seems to work well.... Couple things I like about it, is it has about
a 30 minute working time, plus I found it cleans up with denatured alcohol.
The alcohol does not effect the corian....

Here is a web site for it:
http://www.devcon.com/

Paul N

User avatar
lovebugjunkie
Vectric Wizard
Posts: 351
Joined: Tue Jul 10, 2007 1:12 am
Model of CNC Machine: Romaxx HS1
Location: USA

Re: Candle holder, Thank you Khalid

Post by lovebugjunkie »

Nice result Paul, I like the way you used two different color.

CRFultz
Vectric Wizard
Posts: 1160
Joined: Tue Mar 28, 2006 4:21 pm
Location: Longview, Texas

Re: Candle holder, Thank you Khalid

Post by CRFultz »

Nice work guys, very creative

Post Reply