Here's mine, althouth the photo is a couple of months old. A RatRig 1075 with a Duet3D MB6HC controller and a Makita palm router. The specifications can be found here, although I have modified a few things:
Gallery Of Machines
-
- Vectric Craftsman
- Posts: 193
- Joined: Sat May 21, 2022 11:39 am
- Model of CNC Machine: Stepcraft M.1000
- Location: North Wiltshire, United Kindgom
Re: Gallery Of Machines
Be wary of taking the advice of someone who thinks he knows what he's doing, and don't listen to me!
- FabLab Wageningen
- Vectric Craftsman
- Posts: 211
- Joined: Mon May 09, 2022 8:17 pm
- Model of CNC Machine: Ooznest Workbee 1500x1500
- Location: Wageningen, Netherlands
- Contact:
Re: Gallery Of Machines
and here's ours:
It's an Ooznest WorkBee 1500x1500. We built it as a kit, it took quite a long time. The enclosure of Fort Knox proportions (including a separate 24v control circuit) was forced upon us by mrs. Health and Safety.
Do not mind the mess - we're a Makerspace
Marcel.
It's an Ooznest WorkBee 1500x1500. We built it as a kit, it took quite a long time. The enclosure of Fort Knox proportions (including a separate 24v control circuit) was forced upon us by mrs. Health and Safety.
Do not mind the mess - we're a Makerspace
Marcel.
-
- Vectric Wizard
- Posts: 318
- Joined: Sun Feb 20, 2022 12:59 pm
- Model of CNC Machine: Alpha CNC 6090 with 4th Axis
- Location: Dorset, England
Re: Gallery Of Machines
Here's mine.
It's a Chinese 6090 with rotary axis from Alpha CNC.
I built a rolling table for it with space for 6 tall & 6 shallow Ikea plastic bins.
We've just moved house and this is it being moved to the far end of the garage with the aim to section it off with loads of sound proofing and dust extraction.
It's a Chinese 6090 with rotary axis from Alpha CNC.
I built a rolling table for it with space for 6 tall & 6 shallow Ikea plastic bins.
We've just moved house and this is it being moved to the far end of the garage with the aim to section it off with loads of sound proofing and dust extraction.