The Next 50 Years

An area to upload images of pieces cut using VCarve Pro
Post Reply
Luvtocarve
Vectric Craftsman
Posts: 198
Joined: Sat May 16, 2020 4:32 pm
Model of CNC Machine: Next Wave Piranha XL
Location: Wadsworth, Ohio
Contact:

The Next 50 Years

Post by Luvtocarve »

A friend of mine wanted to use some of the wood for Christmas presents from an old picnic table his dad made about 50 years ago. The table was redwood with many coats of paint and was in very poor condition. We managed to salvage enough solid wood to make these cheese boards and some tea light holders for his 5 brothers and sisters, along with some other family members that frequented the backyard in their childhood. The cheese boards are inlayed with small Farberware cutting boards we got on Amazon and cut to match the profile we wanted. Hope they last another 50 years.
Attachments
Cheese Board 1.jpg
Tea Light 1.jpg
Tea Light 2.jpg
Steve Harp
Wadsworth, Ohio USA
www.trlw.us

User avatar
jfederer
Vectric Wizard
Posts: 368
Joined: Tue Nov 27, 2018 1:09 am
Model of CNC Machine: CanCam D23M
Location: Horton Township Ontario Canada
Contact:

Re: The Next 50 Years

Post by jfederer »

What a nice memento!
Joe Federer

www.fabrikisto.com incl. Tailmaker software
www.federer.ca

User avatar
FabLab Wageningen
Vectric Craftsman
Posts: 214
Joined: Mon May 09, 2022 8:17 pm
Model of CNC Machine: Ooznest Workbee 1500x1500
Location: Wageningen, Netherlands
Contact:

Re: The Next 50 Years

Post by FabLab Wageningen »

That's a nice idea and well executed. Thanks for giving me inspiration.

Marcel.

Post Reply