Turned Box, Carved top
- TomWS
- Vectric Wizard
- Posts: 350
- Joined: Sat Mar 06, 2021 11:06 pm
- Model of CNC Machine: OB Lead 1010, Mach3; OB C-Beam 1060 grbl
Turned Box, Carved top
Christmas Present:
-
- Vectric Craftsman
- Posts: 203
- Joined: Sat May 16, 2020 4:32 pm
- Model of CNC Machine: Next Wave Piranha XL
- Location: Wadsworth, Ohio
- Contact:
Re: Turned Box, Carved top
Was the bottom of the bowl lathe turned? The top (and bottom) is beautiful.
Steve Harp
Wadsworth, Ohio USA
www.trlw.us
Wadsworth, Ohio USA
www.trlw.us
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Turned Box, Carved top
Wow, Tom! Beautiful box and great use of your tools and material!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- TomWS
- Vectric Wizard
- Posts: 350
- Joined: Sat Mar 06, 2021 11:06 pm
- Model of CNC Machine: OB Lead 1010, Mach3; OB C-Beam 1060 grbl
Re: Turned Box, Carved top
Thank you, both.
@Luvtocarve, yes, the box itself was turned on a wood lathe. Using a 'well established' Cherry cutoff. That's the nice thing about turning, I get to use all those little pieces that were too nice to throw away. It's amazing how much supply of 'finial' material I have laying around
@Luvtocarve, yes, the box itself was turned on a wood lathe. Using a 'well established' Cherry cutoff. That's the nice thing about turning, I get to use all those little pieces that were too nice to throw away. It's amazing how much supply of 'finial' material I have laying around
- Todd Bailey
- Vectric Staff
- Posts: 625
- Joined: Mon Nov 24, 2014 8:40 pm
- Model of CNC Machine: CraftCNC
- Contact:
Re: Turned Box, Carved top
Ohhhh that is nice!!!!
Love the combo of the CNC and lathe... also the material choices.
Well done and thanks for sharing!
Is that the Celtic Knot from the FREE D&M Machinist Starter Pack?
https://store.designandmake.com/shop/product/17885
If so you have done an amazing job on the cut and finish!
Love the combo of the CNC and lathe... also the material choices.
Well done and thanks for sharing!
Is that the Celtic Knot from the FREE D&M Machinist Starter Pack?
https://store.designandmake.com/shop/product/17885
If so you have done an amazing job on the cut and finish!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
Todd Bailey | Design and Make
DesignAndMake.com
- TomWS
- Vectric Wizard
- Posts: 350
- Joined: Sat Mar 06, 2021 11:06 pm
- Model of CNC Machine: OB Lead 1010, Mach3; OB C-Beam 1060 grbl
Re: Turned Box, Carved top
Thanks for the compliments! I really appreciate them!
I also like that I can get pre-made 3D designs and your tools make it easy to fit together into a complete solution!
Yes it is! I like to use free stuff!Todd Bailey wrote: ↑Mon Feb 28, 2022 10:09 amIs that the Celtic Knot from the FREE D&M Machinist Starter Pack?
I also like that I can get pre-made 3D designs and your tools make it easy to fit together into a complete solution!