Rebuilding Corbels

An area to upload images of pieces cut using VCarve Pro
Post Reply
User avatar
sharkcutup
Vectric Wizard
Posts: 2885
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Location: U.S.A.

Rebuilding Corbels

Post by sharkcutup »

I have undertaken a project of rebuilding Four (4) Corbels which are 33" tall by 24" deep by 3" thick. See images below:
20210816_101950.jpg
20210816_102057.jpg
20210818_092230.jpg
This is what I have achieved thus far:
20211120_085228_new.jpg
I have the designs (3) carved for the other side too!

Next to carve/cut frame boards side and bottom.

One Corbel is nearly complete ---- just three more to assemble :roll:

Mostly carved in Cedar with support frame in Pine (which will be sealed and painted before designs are attached). Was not able to get enough Cedar for entire Corbels.

Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554

User avatar
jimandi5000
Vectric Wizard
Posts: 1050
Joined: Wed Mar 11, 2015 6:50 pm
Model of CNC Machine: Home Made 60 x 120
Location: North Houston Tx.
Contact:

Re: Rebuilding Corbels

Post by jimandi5000 »

Looks like some fun work.

Please post the completed project pictures.
Thanks,
Jim

User avatar
sharkcutup
Vectric Wizard
Posts: 2885
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Location: U.S.A.

Re: Rebuilding Corbels

Post by sharkcutup »

20211124_185855.jpg
20211124_201221.jpg
20211126_212111.jpg
Here is a completed corbel. I have another about 2/3 from completion.

Corbel can be disassembled for sealing and painting too.

Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554

User avatar
jimandi5000
Vectric Wizard
Posts: 1050
Joined: Wed Mar 11, 2015 6:50 pm
Model of CNC Machine: Home Made 60 x 120
Location: North Houston Tx.
Contact:

Re: Rebuilding Corbels

Post by jimandi5000 »

Now that is a nice job!
Thanks,
Jim

User avatar
sharkcutup
Vectric Wizard
Posts: 2885
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Location: U.S.A.

Re: Rebuilding Corbels

Post by sharkcutup »

Thank You, Jim

Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554

Post Reply