Projects

An area to upload images of pieces cut using VCarve Pro
Post Reply
User avatar
A6ETramMN
Posts: 9
Joined: Sun Feb 28, 2021 2:23 am
Model of CNC Machine: OneFinity Woodworker
Location: Lakeville, MN

Projects

Post by A6ETramMN »

These are some of my projects. I’m not much of a poster, but thought I would share.
Attachments
00F7D668-E128-457F-848A-475963CCF0A7.jpeg
11F7E057-1143-4D77-A467-C132A7B8A24A.jpeg
2F57B386-9C96-44C4-9D4D-F183FA75E1E2.jpeg
7E96D646-92FB-4CAC-AF61-C849FFC5BA88.jpeg
E38CC54F-B2D1-4A8E-A09F-FEC876B512C4.jpeg
OneFinity Woodworker
If at first you don’t succeed, you’re about average.

Fabnet2000
Vectric Apprentice
Posts: 67
Joined: Wed Aug 25, 2021 4:59 pm
Model of CNC Machine: Laguna IQ
Location: Arkansas USA

Re: Projects

Post by Fabnet2000 »

Excellent design work.

User avatar
scotttarnor
Vectric Wizard
Posts: 941
Joined: Fri Aug 30, 2019 11:40 pm
Model of CNC Machine: Piranha XL , Shark HD520
Location: La Crosse WI

Re: Projects

Post by scotttarnor »

Nice work! Love the hops on Worry Warts!
I am not familiar with the counter you have on the Worry Warts sign could you tell me what it is for ?
Scott T

@scottscnc

User avatar
Todd Bailey
Vectric Staff
Posts: 622
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC
Contact:

Re: Projects

Post by Todd Bailey »

NIce!!!

The finishes are great... thanks for sharing!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com

Holzarbeiter
Vectric Wizard
Posts: 409
Joined: Thu Apr 06, 2017 3:07 am
Model of CNC Machine: Camaster Stinger SR24
Location: Addison, PA

Re: Projects

Post by Holzarbeiter »

Very nice! You should post more often...good job.
Joe

I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.

User avatar
A6ETramMN
Posts: 9
Joined: Sun Feb 28, 2021 2:23 am
Model of CNC Machine: OneFinity Woodworker
Location: Lakeville, MN

Re: Projects

Post by A6ETramMN »

Hi Scott,

The project is a Bar Billiards scoreboard. My brother-in-law played on a bar billiards table somewhere and decided to build one. I guess the game is only in the UK, so finding a scoreboard was difficult, most scoreboards are for snooker. The markers are made from maple with a dovetail relief on the back and the runner is walnut with matching angles to the dovetails.
OneFinity Woodworker
If at first you don’t succeed, you’re about average.

Post Reply