tested out v11 on this Mankala board

An area to upload images of pieces cut using VCarve Pro
Post Reply
Sveininge79
Posts: 6
Joined: Tue May 07, 2019 4:29 pm
Model of CNC Machine: Workbee

tested out v11 on this Mankala board

Post by Sveininge79 »

had a project that fitted perfectly to try out the new vectric software. it came out flawlessly:)

Mankala is a easy to learn but hard to master boardgame.
Attachments
C9A53DC8-4038-413C-8880-C5DF74156DBA.jpeg
1EDDB724-0E60-4E3C-8472-4848A4DBE469.jpeg
B4B6A34C-FF11-49A3-B1D3-EFE358161B78.jpeg
241AF55F-8869-4155-AB0C-6FDB4BAE6188.jpeg
0C61FD80-31F3-4F0D-9D49-1122D592C4DA.jpeg

User avatar
scotttarnor
Vectric Wizard
Posts: 941
Joined: Fri Aug 30, 2019 11:40 pm
Model of CNC Machine: Piranha XL , Shark HD520
Location: La Crosse WI

Re: tested out v11 on this Mankala board

Post by scotttarnor »

Nice test !
Scott T

@scottscnc

User avatar
Todd Bailey
Vectric Staff
Posts: 622
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC
Contact:

Re: tested out v11 on this Mankala board

Post by Todd Bailey »

Hello Sveininge79!

Super job using dish components for this... really thinking outside of the box! My kind of project!!!

Thanks for sharing!!!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com

Sveininge79
Posts: 6
Joined: Tue May 07, 2019 4:29 pm
Model of CNC Machine: Workbee

Re: tested out v11 on this Mankala board

Post by Sveininge79 »

Pretty easy project to
setup in vcarve just used the dish and offsets the outline:) used a 4mm ballnose on the bowls and texture, 3 mill straight mill for the cutout and a vbit for the text.

Post Reply