Fender Telecaster Thinline Guitar Body

An area to upload images of pieces cut using VCarve Pro
Post Reply
User avatar
sharkcutup
Vectric Wizard
Posts: 1735
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Contact:

Fender Telecaster Thinline Guitar Body

Post by sharkcutup »

20210611_172749.jpg
Carved in White Oak

Part 1 of 2 - Bottom of Telecaster Thinline Guitar Body (a much lighter Guitar Body)

Now to find a hunk of Mahogany for the Top (part 2 of 2) of the Telecaster Thinline Guitar Body.

Sharkcutup
hoganscnccrafts.com
V-Carve Help is Available!!!
PM me or Visit my website!
V-Carve Pro 11.016

User avatar
Xxray
Vectric Wizard
Posts: 2241
Joined: Thu Feb 17, 2011 8:47 am
Model of CNC Machine: CAMaster Stinger 1
Location: MI USA

Re: Fender Telecaster Thinline Guitar Body

Post by Xxray »

Looks promising - I have 10 electric guitars and lately have been reaching for the lighter ones the most.
Doug

User avatar
scottp55
Vectric Wizard
Posts: 4566
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11
Location: Kennebunkport, Maine, US

Re: Fender Telecaster Thinline Guitar Body

Post by scottp55 »

Looking good so far Shark :)
Nice clean cut!
That's a LOT of material removed...are you clamping it to keep flat until top is done?
The best-laid schemes o' mice an' men
Gang aft agley,

RB

User avatar
sharkcutup
Vectric Wizard
Posts: 1735
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Contact:

Re: Fender Telecaster Thinline Guitar Body

Post by sharkcutup »

Yup! Got to keep it flat!

Sharkcutup
hoganscnccrafts.com
V-Carve Help is Available!!!
PM me or Visit my website!
V-Carve Pro 11.016

daxco
Posts: 2
Joined: Wed Aug 18, 2021 2:00 pm
Model of CNC Machine: onefinity

Re: Fender Telecaster Thinline Guitar Body

Post by daxco »

Hey, cool guitar! Would you like to sell this file with toolpaths in place? Let me know if so..thanks :)

Post Reply