Burnt catch all tray

An area to upload images of pieces cut using VCarve Pro
Post Reply
Vectric Craftsman
Posts: 198
Joined: Thu May 31, 2012 6:49 pm
Model of CNC Machine: Legacy Arty 36
Location: Georgetown, TX

Burnt catch all tray

Post by mrmfwilson »

Burnt this pine one. It’s 1/4” thick all around. The trick to keeping it flat is to burn the inside first. The bottom will bulge because you are taking all the moisture from the inside surface. Then when you burn the bottom the wood relaxes as the moisture equalizes on both surfaces and the bottom gets flat. This one came out really well. Sorry Todd I burnt it man!
Mr. Wilson
CenterLine Designs
Facebook - Centerline Designs

Vectric Wizard
Posts: 478
Joined: Sat Jun 11, 2011 3:27 pm
Model of CNC Machine: Probotix Meteor 25 x 50
Location: Jefferson City, Mo.

Re: Burnt catch all tray

Post by woody53 »

Thats really cool. I like it.


User avatar
Todd Bailey
Vectric Staff
Posts: 447
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC

Re: Burnt catch all tray

Post by Todd Bailey »

Hey... if you burning something makes it look as good as that... no need to say sorry! Love it!!!

Thanks for sharing and inspiring!!!!
Todd Bailey | Design and Make

Post Reply