Burnt catch all tray
- mrmfwilson
- Vectric Craftsman
- Posts: 239
- Joined: Thu May 31, 2012 6:49 pm
- Model of CNC Machine: Legacy Arty 36
- Location: Georgetown, TX
Burnt catch all tray
Burnt this pine one. It’s 1/4” thick all around. The trick to keeping it flat is to burn the inside first. The bottom will bulge because you are taking all the moisture from the inside surface. Then when you burn the bottom the wood relaxes as the moisture equalizes on both surfaces and the bottom gets flat. This one came out really well. Sorry Todd I burnt it man!
Mr. Wilson
CenterLine Designs
Facebook - Centerline Designs
CenterLine Designs
Facebook - Centerline Designs
-
- Vectric Wizard
- Posts: 493
- Joined: Sat Jun 11, 2011 3:27 pm
- Model of CNC Machine: Probotix Meteor 25 x 50
- Location: Jefferson City, Mo.
Re: Burnt catch all tray
Thats really cool. I like it.
Dave
Dave
- Todd Bailey
- Vectric Staff
- Posts: 624
- Joined: Mon Nov 24, 2014 8:40 pm
- Model of CNC Machine: CraftCNC
- Contact:
Re: Burnt catch all tray
Hey... if you burning something makes it look as good as that... no need to say sorry! Love it!!!
Thanks for sharing and inspiring!!!!
Thanks for sharing and inspiring!!!!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
Todd Bailey | Design and Make
DesignAndMake.com