Something simple

An area to upload images of pieces cut using VCarve Pro
Post Reply
woody53
Vectric Wizard
Posts: 478
Joined: Sat Jun 11, 2011 3:27 pm
Model of CNC Machine: Probotix Meteor 25 x 50
Location: Jefferson City, Mo.

Something simple

Post by woody53 »

Having some landscaping done and made a raised flower bed to go in there. Kim wanted it to go with our state bicentennial so here it is.
20210402_121857_Burst01-1.jpg
20210402_121919-1.jpg
Dave

User avatar
Rcnewcomb
Vectric Wizard
Posts: 4691
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: Something simple

Post by Rcnewcomb »

Do you use burning or gel stain to darken the letters?
- Randall Newcomb
10 fingers in, 10 fingers out
another good day in the shop

woody53
Vectric Wizard
Posts: 478
Joined: Sat Jun 11, 2011 3:27 pm
Model of CNC Machine: Probotix Meteor 25 x 50
Location: Jefferson City, Mo.

Re: Something simple

Post by woody53 »

I did a 3/16 pocket and burned them with a torch. Worked OK.

Dave

Post Reply