Out working in the shop this past weekend making a last minute Christmas present for my grandson. He likes board games so I hope he'll like this one!! I just need to add the 1/4" bungee cords for the shooters. P.S. I do have a switchable blocker board that only has 1 slot in it.
All graphics done with my J Tech 7 watt laser. Ten minutes after posting on Facebook I had an order for one.
John Frankforther
Last minute Christmas Present
-
- Posts: 21
- Joined: Wed Jan 17, 2018 7:32 pm
- Model of CNC Machine: CNC Router Parts
-
- Vectric Wizard
- Posts: 409
- Joined: Thu Apr 06, 2017 3:07 am
- Model of CNC Machine: Camaster Stinger SR24
- Location: Addison, PA
Re: Last minute Christmas Present
Very cool gift, John, and nicely done as well!
Joe
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
-
- Posts: 21
- Joined: Wed Jan 17, 2018 7:32 pm
- Model of CNC Machine: CNC Router Parts
Re: Last minute Christmas Present
Thank you. My wife and I played a couple games on it to test it out. It will be fun.
- Todd Bailey
- Vectric Staff
- Posts: 624
- Joined: Mon Nov 24, 2014 8:40 pm
- Model of CNC Machine: CraftCNC
- Contact:
Re: Last minute Christmas Present
Hey John...
Looks like lots of fun!!! Handmade games for Christmas... it's going to be a winner!!
Thanks for sharing!!
Looks like lots of fun!!! Handmade games for Christmas... it's going to be a winner!!
Thanks for sharing!!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
Todd Bailey | Design and Make
DesignAndMake.com
-
- Posts: 5
- Joined: Tue Feb 09, 2021 5:36 pm
- Model of CNC Machine: x carve
Re: Last minute Christmas Present
That's nice work seem like you have your settings dialed in
Could you share some setting you have for your 7 watt j tech i cannot get mine dialed in just trying to do a image
Thanks Jeff
Could you share some setting you have for your 7 watt j tech i cannot get mine dialed in just trying to do a image
Thanks Jeff
-
- Vectric Craftsman
- Posts: 109
- Joined: Tue Jan 24, 2012 8:42 am
- Model of CNC Machine: Axiom AR8 Pro V5+Jetch Laser+Rotary
Re: Last minute Christmas Present
I also would be curious as to your feed speed with the laser for that particular oak (?) stock. Nice work.
Tim
Tim