Wall Panels

An area to upload images of pieces cut using VCarve Pro
Post Reply
User avatar
dealguy11
Vectric Wizard
Posts: 2463
Joined: Tue Sep 22, 2009 9:52 pm
Model of CNC Machine: Anderson Selexx 510
Location: Henryville, PA

Wall Panels

Post by dealguy11 »

There's been a couple of discussions about doors and wall panels. Here are some interesting ones we made today using pockets and moulding toolpaths. The pockets are deeper than normal because the customer intends to put mirrors in them. I would probably have pocketed out the entire back of the panels, but this is what they requested.
Attachments
IMG_20200616_190011.jpg
IMG_20200616_185731.jpg
IMG_20200616_185742.jpg
Steve Godding
Not all who wander (or wonder) are lost

User avatar
mtylerfl
Vectric Archimage
Posts: 5865
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: Wall Panels

Post by mtylerfl »

Those look really sharp, Steve!
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

User avatar
TReischl
Vectric Wizard
Posts: 4585
Joined: Thu Jan 18, 2007 6:04 pm
Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
Location: Leland NC

Re: Wall Panels

Post by TReischl »

Nice. Very nice.
"If you see a good fight, get in it." Dr. Vernon Johns

User avatar
scottp55
Vectric Wizard
Posts: 4713
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: Wall Panels

Post by scottp55 »

Good clean work!! :)
NICE! :)
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

Post Reply