Page 6 of 6

Re: YouTube Videos - Show us what you are cutting

Posted: Thu Jun 14, 2018 10:02 pm
by MarkL
Hello y'all.

I've been a VCarve Pro user for close to 4 years (Thanks, Bill Griggs!) but I haven't posted (or lurked) much on this forum at all. I make all kinds of things with my home-built Gatton CNC, and just recently added a rotary axis to it. I've done a few VCarve tutorials for absolute beginners, but haven't recorded one in a while. (I just upgraded to v9.0, and am still getting comfortable with the changes from v8.5.)

Here's a link to my channel for those who are interested. Please keep in mind that just about everything over there is geared toward the absolute beginner who has never done anything CNC before, or has extremely limited experience with one.

https://www.youtube.com/c/marklindsaycnc

I will be doing a LOT more project videos in the near future. I'm just rotten at taking pictures and shooting video of the actual projects themselves, but I'm changing that.

Thanks!

Re: YouTube Videos - Show us what you are cutting

Posted: Mon Jun 18, 2018 4:34 am
by Mobius
I just started in on this youTube thing as well, thought I'd add to this thread.

https://www.youtube.com/channel/UCKr5Hv ... Evu01IJZrA

Re: YouTube Videos - Show us what you are cutting

Posted: Fri Feb 01, 2019 1:53 pm
by CZ75
Machine is a CNCRouterParts Pro4824 with NEMA34 electrics.
American Flag on a piece of rough cut Pressure treated fence board. I was very surprised at how well PT wood cuts.
Even thought the chips tend to clump up I guess from the moisture, always wear a mask.

Re: YouTube Videos - Show us what you are cutting

Posted: Fri Dec 06, 2019 12:54 am
by jimandi5000
Cutting some drawers


Re: YouTube Videos - Show us what you are cutting

Posted: Wed Feb 19, 2020 2:53 pm
by wb9tpg
First test of my new 800W water cooled spindle on my Shapeoko. It's cutting Beer Taps for a client. I had planned to throw them away but the first test was perfect. Amazing how quiet the spindle is compared to the Dewalt router


Re: YouTube Videos - Show us what you are cutting

Posted: Mon Feb 24, 2020 1:49 am
by wb9tpg
More video of using the laser on the beer taps--- sorry for the rotation



Re: YouTube Videos - Show us what you are cutting

Posted: Sat Apr 18, 2020 10:06 am
by pratik corporation
As India is under LOck Down and all manufacturing is stoped, I will try to upload some video once we restart after LOckDown.

Re: YouTube Videos - Show us what you are cutting

Posted: Sun Jan 31, 2021 10:42 am
by sfo2406
Hello. I mostly make inlaid cutting blocks. Here's my latest one.


Re: YouTube Videos - Show us what you are cutting

Posted: Sun Jun 12, 2022 5:47 pm
by Hundgubbe
I use my machine to cut PP plastic that I weld together to make dog crates for cars.