YouTube Videos - Show us what you are cutting

An area to upload images of pieces cut using VCarve Pro
Zutroy
Posts: 1
Joined: Sun Oct 12, 2014 6:02 pm
Model of CNC Machine: CNC6040

Re: YouTube Videos - Show us what you are cutting

Post by Zutroy »

Using VCarve Pro to help create a music video:
https://www.youtube.com/watch?v=S7U-mPV3BBc

woodworker1960
Vectric Apprentice
Posts: 67
Joined: Wed Jul 30, 2014 1:29 pm
Model of CNC Machine: CNC Shark extended base
Location: Bunker Hill, West Virginiia

Re: YouTube Videos - Show us what you are cutting

Post by woodworker1960 »

pben wrote:Here's a clip from my workshop:

I'm routing the outlines and soundhole of a concert guitar soundboard. The workpiece is held with vacuum and the white vacuum board is made out of high pressure laminate (similar to Formica, only 1/2" thick). It works like a dream...

Regards
Peter
Hello Peter. Would it be possible for you to explain how you made your vacuum hold down table. I would love to make one about this size. Sources of the high pressure laminate and what your other items you used to make it. Any help would be appreciated.
Thank you
Richard

cabnet636
Vectric Wizard
Posts: 2596
Joined: Fri Dec 21, 2007 1:57 am
Model of CNC Machine: CAMaster 508 ATC
Location: columbia sc
Contact:

Remote machine control

Post by cabnet636 »

Running files from my house and shop is 35 miles away

James McGrew
http://www.mcgrewwoodwork.com
CAMaster ATC 508 24/7 http://dropc.am/p/EJaKyl

User avatar
Mogal
Vectric Craftsman
Posts: 238
Joined: Wed Oct 13, 2010 5:28 pm
Model of CNC Machine: DIY CNC
Location: Victoria, BC
Contact:

Re: YouTube Videos - Show us what you are cutting

Post by Mogal »

My first guitar body!


mountaincraft
Vectric Craftsman
Posts: 229
Joined: Sat Apr 30, 2011 2:30 pm
Model of CNC Machine: DIY 4' x 8' CNC Router/Plasma
Location: Shingletown, Ca. 96088

Re: YouTube Videos - Show us what you are cutting

Post by mountaincraft »

Surfacing a large slab of myrtle burl for a customer.. Plans to use it for a coffee table...


scancad
Posts: 18
Joined: Tue Aug 31, 2010 7:41 am
Model of CNC Machine: Pro Carv
Location: UK
Contact:

Re: YouTube Videos - Show us what you are cutting

Post by scancad »

9 years on - here's our Youtube Chanel https://www.youtube.com/user/scancad1
Subject Pro Carv CNC development videos
By SCANCAD SERVICES LTD

Kru82
Vectric Apprentice
Posts: 50
Joined: Wed Apr 01, 2015 7:33 pm
Model of CNC Machine: custom

Re: YouTube Videos - Show us what you are cutting

Post by Kru82 »

A few different things done in the past week or so . Torn on a finish for the Frazetta Death Dealer ( last image )
Attachments
10986185_10205576205298221_5278428264455945338_n.jpg
11201884_10205576211738382_4039325776027828797_n.jpg
11209446_10205576218258545_2651017129720995912_n.jpg
19421_10205576218658555_6080336686586048318_n.jpg
11210422_10205576191817884_2485385952490692883_n.jpg

DavidWestley
Posts: 16
Joined: Sat Sep 05, 2015 11:45 am
Model of CNC Machine: X Carve

Re: YouTube Videos - Show us what you are cutting

Post by DavidWestley »

My first Wooden Clock (sorry for the poor video).

One of Brian Law's wooden clocks (clock 22). Having proved I can do it, I'll now strip it down and make a few personalised changes...

Great challenge if you're looking for something a little more complex.


AnsenSeale
Posts: 26
Joined: Mon Oct 08, 2012 3:09 pm
Model of CNC Machine: Industrial CNC

Re: YouTube Videos - Show us what you are cutting

Post by AnsenSeale »

This is a project I did for the San Antonio Spurs at the AT&T Center Using V-Carve. My machine is only 8 ft. long but the panels are 11ft high, so I had to do some careful indexing.



It's interactive so when someone touches a panel, colors shoot out from that location.
Attachments
_DSC8471.jpg
We'reGoodRightHere.jpg

cabnet636
Vectric Wizard
Posts: 2596
Joined: Fri Dec 21, 2007 1:57 am
Model of CNC Machine: CAMaster 508 ATC
Location: columbia sc
Contact:

Re: YouTube Videos - Show us what you are cutting

Post by cabnet636 »

Man how cool is that !!
James McGrew
http://www.mcgrewwoodwork.com
CAMaster ATC 508 24/7 http://dropc.am/p/EJaKyl

tatinc2000
Vectric Craftsman
Posts: 122
Joined: Sat Jan 05, 2013 8:16 pm
Model of CNC Machine: Homegrown
Location: Central Minnesota

Re: YouTube Videos - Show us what you are cutting

Post by tatinc2000 »

Time lapse of a welcome sign. https://youtu.be/5e-PyHOqmgg

lundebc1
Posts: 11
Joined: Fri May 06, 2016 3:10 pm
Model of CNC Machine: DIY CNC 32x48

Re: YouTube Videos - Show us what you are cutting

Post by lundebc1 »

Mash Paddle for a buddy starting a small brew shop. Still learning the ropes, but getting better with each piece.



and a sign for another buddy who has a Christmas Tree farm.



Forgive the music, need to learn more about editing videos, and I need to learn how to use time-lapse.....

CNCSwede
Posts: 32
Joined: Wed Nov 29, 2017 9:47 pm
Model of CNC Machine: Raw 1.5
Location: Umea Sweden
Contact:

Re: YouTube Videos - Show us what you are cutting

Post by CNCSwede »

Hi everyone! I’m a new CNC, Vectric and forum user, I bought my machine in June and just used different freeware products and other software earlier but last week I bought VCarve. Here is my latest video and here is the address to my channel if anyone is interested to see what I have done so far. https://www.youtube.com/channel/UCKcrGF ... eGWLD9zOrQ Have a great day brothers and sisters CNC’ers :D

User avatar
Makingtoothpicks
Vectric Wizard
Posts: 520
Joined: Tue Jul 23, 2013 8:46 pm
Model of CNC Machine: Cncrouterparts CPR2448
Location: Burien, Wa
Contact:

Re: YouTube Videos - Show us what you are cutting

Post by Makingtoothpicks »

Nice video. Project came out very nice.

Don

CNCSwede
Posts: 32
Joined: Wed Nov 29, 2017 9:47 pm
Model of CNC Machine: Raw 1.5
Location: Umea Sweden
Contact:

Re: YouTube Videos - Show us what you are cutting

Post by CNCSwede »

Thanks Don :D

Post Reply