X and O game with toilet paper

An area to upload images of pieces cut using VCarve Pro
Post Reply
User avatar
sawmiller
Vectric Wizard
Posts: 531
Joined: Sat May 03, 2008 8:34 pm
Model of CNC Machine: joe's rack and pinion hybrid
Location: camden,tn

X and O game with toilet paper

Post by sawmiller »

heres a file i made and saved as a crv file. so you need to look it over carefully.
it uses becki's way of using test pieces to detirmine the offset to apply to the cutout toolpath.
mine with my bit and material was -.01.
anyways heres the file and picture
2020-02-11 11.19.44.jpg
Attachments
toilet paper xo.zip
(183.58 KiB) Downloaded 103 times
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn

User avatar
TReischl
Vectric Wizard
Posts: 4655
Joined: Thu Jan 18, 2007 6:04 pm
Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
Location: Leland NC

Re: X and O game with toilet paper

Post by TReischl »

LOL, better store those rolls of TP in a safe these days!
"If you see a good fight, get in it." Dr. Vernon Johns

garylmast
Vectric Wizard
Posts: 1588
Joined: Fri Oct 23, 2009 4:03 pm
Location: Sandy, Utah

Re: X and O game with toilet paper

Post by garylmast »

LOL, better store those rolls of TP in a safe these days!
Yeah, out of the world's population of over 6-billion, 4k people, most with one foot on a banana peel and the other in the grave has died so far from this virus. Heaven help you if you run out of toilet paper...or at least that's the view of the people emptying the selves at the stores.

User avatar
rtibbs
Vectric Wizard
Posts: 411
Joined: Mon Nov 12, 2018 11:15 pm
Model of CNC Machine: Shopbot desktop
Location: Central Florida

Re: X and O game with toilet paper

Post by rtibbs »

Maybe you should replace the X’s with corn cobs......just in case the rolls run out

User avatar
TReischl
Vectric Wizard
Posts: 4655
Joined: Thu Jan 18, 2007 6:04 pm
Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
Location: Leland NC

Re: X and O game with toilet paper

Post by TReischl »

rtibbs2018 wrote:
Sat Mar 14, 2020 6:17 pm
Maybe you should replace the X’s with corn cobs......just in case the rolls run out
Awww, RT, you just had to go THERE, didn't you?
"If you see a good fight, get in it." Dr. Vernon Johns

CarveOne
Vectric Wizard
Posts: 1479
Joined: Sun Nov 28, 2010 5:10 pm
Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
Location: Eastern NC, USA

Re: X and O game with toilet paper

Post by CarveOne »

Sawmiller, if we mount your X and O game in the Outhouse I made back in 2014 could we sell it as a "Toilet Arcade? :wink:

viewtopic.php?f=29&t=21343&p=151392&hil ... se#p151392
Attachments
Outhouse.jpg
Outhouse.jpg (7.43 KiB) Viewed 2357 times
CarveOne
http://www.carveonecncwoodcraft.com

User avatar
sawmiller
Vectric Wizard
Posts: 531
Joined: Sat May 03, 2008 8:34 pm
Model of CNC Machine: joe's rack and pinion hybrid
Location: camden,tn

Re: X and O game with toilet paper

Post by sawmiller »

Sounds good to me😀
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn

Post Reply