Zipper Clock

An area to upload images of pieces cut using VCarve Pro
User avatar
rtibbs
Vectric Craftsman
Posts: 277
Joined: Mon Nov 12, 2018 11:15 pm
Model of CNC Machine: Shopbot desktop
Location: Central Florida

Zipper Clock

Post by rtibbs »

Another of Michael's POM, the Zipper Clock
Made from "Big Box pine with lacquer finish

Zipper clock.jpg

User avatar
dwilli9013
Vectric Wizard
Posts: 1232
Joined: Mon Sep 30, 2013 12:45 am
Model of CNC Machine: 3 axis Self Designed Self Built
Location: Machesney Park Illinois

Re: Zipper Clock

Post by dwilli9013 »

Nice Job. Always a pleasure to see the free projects posted for all to see. Thanks for sharing. :lol: :lol: :lol:
D-Dub
Dwayne
Dwilli

User avatar
scottp55
Vectric Wizard
Posts: 3694
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: Zipper Clock

Post by scottp55 »

Good clean cut and a fine finish..."Who could ask for anything more :) :)
Good Job!
scott"
scott

User avatar
mtylerfl
Vectric Wizard
Posts: 4691
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA
Contact:

Re: Zipper Clock

Post by mtylerfl »

Great work, Ron! Beautiful clean finish!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

ezurick

Re: Zipper Clock

Post by ezurick »

I do not see any "Zipper Clock" project in Michael's POM list. Where did you find this?

There are lots of projects I would love to try, but they are in Aspire format only. Not fair to us Vcarve folks.. :(

User avatar
rtibbs
Vectric Craftsman
Posts: 277
Joined: Mon Nov 12, 2018 11:15 pm
Model of CNC Machine: Shopbot desktop
Location: Central Florida

Re: Zipper Clock

Post by rtibbs »

V&Co. under Project of Month list

ezurick

Re: Zipper Clock

Post by ezurick »

rtibbs2018 wrote:V&Co. under Project of Month list

I have scrolled through all of Michael's POM and I do not see any Zipper Clock. What is the link?

https://www.vectric.com/vectric-community/free-projects

Look through this link.. That is all of Michael's POM.

User avatar
gkas
Vectric Wizard
Posts: 791
Joined: Sun Jan 01, 2017 3:39 am
Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
Location: Southern California

Re: Zipper Clock

Post by gkas »


kminden
Posts: 27
Joined: Mon Dec 14, 2015 2:52 am
Model of CNC Machine: Homemade

Re: Zipper Clock

Post by kminden »

Turned out really nice!

ezurick

Re: Zipper Clock

Post by ezurick »

gkas wrote:This link will get you there. https://www.vectric.com/vectric-communi ... =1&items=0

Oh Phooey! It is Aspire only! Lastly, to the OP, this is Vcarve forum... not Aspire.

User avatar
rtibbs
Vectric Craftsman
Posts: 277
Joined: Mon Nov 12, 2018 11:15 pm
Model of CNC Machine: Shopbot desktop
Location: Central Florida

Re: Zipper Clock

Post by rtibbs »

ezurick wrote:
gkas wrote:This link will get you there. https://www.vectric.com/vectric-communi ... =1&items=0

Oh Phooey! It is Aspire only! Lastly, to the OP, this is Vcarve forum... not Aspire.
Well if you would read the Project Tutorial you will see it is "Compatible with current version of: VCarve pro and Aspire" Mine was cut before I upgraded to Aspire.
Clock1.jpg

User avatar
mtylerfl
Vectric Wizard
Posts: 4691
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA
Contact:

Re: Zipper Clock

Post by mtylerfl »

Hi Ron and Ed,

The Zipper Clock is indeed an Aspire-only project. I think Ron may have carved this just after upgrading to Aspire.

The PDF Title page in the downloadable files is incorrect (as it shows compatibility with both VC and Aspire). I'm not sure how that happened!

I'm sorry for the confusion.
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

User avatar
rtibbs
Vectric Craftsman
Posts: 277
Joined: Mon Nov 12, 2018 11:15 pm
Model of CNC Machine: Shopbot desktop
Location: Central Florida

Re: Zipper Clock

Post by rtibbs »

My apologizes, I must be getting senile in my old age. I can remember what happened 50 years ago however, ask me what I had for lunch yesterday and that's a different matter.
Checking my history I upgraded to Aspire on June 7, 2019 and downloaded the file on June 15th. Probably one of the reasons I upgraded my software.

Now how I received an incorrect tutorial sheet. ???????

Ron

User avatar
mtylerfl
Vectric Wizard
Posts: 4691
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA
Contact:

Re: Zipper Clock

Post by mtylerfl »

Hi Ron,

All I can think of regarding the incorrect title page is a “copy/paste” error on my part when creating the PDF.

At some point, the correction was made, but the corrected PDF didn’t make it into the zip file of the project itself.

Again, please accept my apology for the confusion.
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

ezurick

Re: Zipper Clock

Post by ezurick »

mtylerfl wrote:Hi Ron,

All I can think of regarding the incorrect title page is a “copy/paste” error on my part when creating the PDF.

At some point, the correction was made, but the corrected PDF didn’t make it into the zip file of the project itself.

Again, please accept my apology for the confusion.

Not a problem Michael... we are all human. But I sure wish that you would consider future monthly projects to always include us Vcarve folks. We feel so left out on Aspire only. Of course, if the projects has Aspire features only, then it would only be appropriate to not include a Vcarve version. But I don't have Aspire, so I wouldn't know. But I would think most projects would be ok... :mrgreen:

Post Reply