First Job with VCW

An area to upload images of pieces cut using VCarve Pro
Post Reply
User avatar
Tony Mac
Vectric Alumni
Posts: 1965
Joined: Sat Jul 30, 2005 6:24 pm
Location: UK
Contact:

First Job with VCW

Post by Tony Mac »

The sign below is new customer Roy Burrill's first job programmed with VCW.

The substrate is 80" x 20" x 3/4 thick Sign Foam board and was cut on his ShopBot
router using a 90 degree 1" diameter V-Bit.

Nice job Roy!

Tony
Attachments
WesOaks_2.jpg
Painted sign being installed
(90.84 KiB) Downloaded 285 times
WesOaks_1.jpg
High Density Foam base
(152.42 KiB) Downloaded 316 times
Last edited by Tony Mac on Sat Jun 24, 2006 1:05 pm, edited 1 time in total.

mphillips
Posts: 1
Joined: Fri May 19, 2006 3:10 am
Location: Pittsfield, MA

Post by mphillips »

Very nice sign Roy did here Tony but I am wondering why the "O" in the word OAKS is not continuous like it is in the word WESTON. Maybe it's the resolution of the picture file that I am looking at?
Marty

User avatar
dighsx
Vectric Wizard
Posts: 939
Joined: Tue Nov 01, 2005 12:36 am
Location: Royal Oak, Michigan USA
Contact:

Post by dighsx »

The signs do look fantastic. The O could be that that's the companies logo and how it is. Now that I've gotten into CNC stuff everywhere I got I notice things like that.

I'd like to try cutting some of that sign foam board. It looks like it would cut nice and hold a sharp edge. Anyone know where to get some at a good price?
Take it easy.
Jay (www.cncjay.com)

User avatar
Tony Mac
Vectric Alumni
Posts: 1965
Joined: Sat Jul 30, 2005 6:24 pm
Location: UK
Contact:

Post by Tony Mac »

Hi Marty - The 'O' in the sign design is drawn that way and I guess it has some meaning to te owners?

Hi Jay - Take a look at these supliers who both claim to ship samples,

http://vectric.com/forum/viewtopic.php?t=324


Tony

User avatar
dighsx
Vectric Wizard
Posts: 939
Joined: Tue Nov 01, 2005 12:36 am
Location: Royal Oak, Michigan USA
Contact:

Post by dighsx »

Thanks for the info Tony!
Take it easy.
Jay (www.cncjay.com)

Post Reply