Finally Done

An area to upload images of pieces cut using VCarve Pro
Post Reply
woody53
Vectric Wizard
Posts: 402
Joined: Sat Jun 11, 2011 3:27 pm
Model of CNC Machine: Probotix Meteor 25 x 50
Location: Jefferson City, Mo.

Finally Done

Post by woody53 »

Made my significant other happy today, when I brought her the cabinet she wanted built upstairs , finally finished. Cut all the pieces on the cnc, but the stiles and rails for the doors ( did those at work ). She wanted the 3d carvings in the panels , instead of punched tin like a pie safe. Time for other things now.
Attachments
20150531_172346.jpg
20150531_172436.jpg

glenninvb
Vectric Wizard
Posts: 1129
Joined: Thu Jul 18, 2013 4:58 pm
Model of CNC Machine: homebuild / VCP 8.0

Re: Finally Done

Post by glenninvb »

Very nice piece!

User avatar
Rcnewcomb
Vectric Wizard
Posts: 4138
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: GCnC/WinCNC
Location: San Jose, California, USA
Contact:

Re: Finally Done

Post by Rcnewcomb »

Well done.

That looks heavy! Are the rails and stiles solid oak or oak plywood with edge banding?
- Randall Newcomb
10 fingers in, 10 fingers out
another good day in the shop

woody53
Vectric Wizard
Posts: 402
Joined: Sat Jun 11, 2011 3:27 pm
Model of CNC Machine: Probotix Meteor 25 x 50
Location: Jefferson City, Mo.

Re: Finally Done

Post by woody53 »

Yeah it is heavy. Stiles and rails are solid oak, the ends and shelves are plywood, did dado's and drilled shelf holes and cut all on cnc.

Chelmite
Posts: 20
Joined: Tue Nov 06, 2012 4:47 am
Model of CNC Machine: Legacy Maverick 4x8, BOSS laser
Location: Los Altos Hills, CA

Re: Finally Done

Post by Chelmite »

Beautiful!

User avatar
llwood
Vectric Wizard
Posts: 391
Joined: Sun Nov 18, 2012 5:07 pm
Model of CNC Machine: Legacy Maverick
Location: Dillsburg, PA
Contact:

Re: Finally Done

Post by llwood »

Yes, I'll bet your SO is extremely happy, as she should be.
--Andy

User avatar
Ms Wolffie
Vectric Wizard
Posts: 2695
Joined: Sat Mar 31, 2012 10:41 pm
Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
Location: Tully Heads, Wet Tropics, Queensland, Australia

Re: Finally Done

Post by Ms Wolffie »

I would love it as well
The grain of the back panel looks like a couple of swimming sharks.
Well chosen :D
Cheers
Wolffie

Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6

Post Reply