Bird feeder

An area to upload images of pieces cut using VCarve Pro
Post Reply
glenninvb
Vectric Wizard
Posts: 1129
Joined: Thu Jul 18, 2013 4:58 pm
Model of CNC Machine: homebuild / VCP 8.0

Bird feeder

Post by glenninvb »

Whomever is responsible for posting and or creating the bird feeder .crv

Thank you, I did a see-thru version with 1/8" cast acrylic (had to heat form)

thank you and the chickadee's and finches thank you as well :D
Attachments
DSCF2485.JPG

sawman
Posts: 11
Joined: Fri Dec 13, 2013 7:20 am
Model of CNC Machine: Shark Pro

Re: Bird feeder

Post by sawman »

Hi

I was wondering if I could get a copy of the files I left a message on the other site but no response it has been so time
I would like to make a new feeder I am just asking thanks using 7.5 and 6.5 Vcarve

sawman@meltel.net

dond52
Vectric Craftsman
Posts: 102
Joined: Fri Jan 14, 2011 11:54 pm
Location: Templeton. PA. 16259

Re: Bird feeder

Post by dond52 »

Sawman, I believe the files are available at this thread. http://forum.vectric.com/viewtopic.php? ... 45#p116330 I was just thinking as I was reviewing the project. It would make a dandy use of plastic 2 liter soda bottles.

glenninvb
Vectric Wizard
Posts: 1129
Joined: Thu Jul 18, 2013 4:58 pm
Model of CNC Machine: homebuild / VCP 8.0

Re: Bird feeder

Post by glenninvb »

Sawman,

Here is CRV.
Machine the vector for the top and bottom panels (profile, on-line) with bit dia. to fit material used. I used 1/8" acrylic so used an 1/8 bit.
You can size the dowel holes as you prefer as well.
Attachments
feeder.crv
(218 KiB) Downloaded 291 times

Post Reply