Guitars - Vectric - Alex Navarro

An area to upload images of pieces cut using VCarve Pro
User avatar
Alex Navarro
Vectric Craftsman
Posts: 175
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Re: Guitars - Vectric - Alex Navarro

Post by Alex Navarro »

Hi

I decided to make this model a free sample to try.

Those who just want to know how to make a guitar or would like to know how my files are and how they work.

Good fun and let me see it when ready! :D :D :D :D

Aspire 3.5

inches


mm


================================================================================


Aspire / Vcarve 8

Inches


mm
Attachments
Jaguar_free-Plan.jpg
Alex Navarro

User avatar
Alex Navarro
Vectric Craftsman
Posts: 175
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Re: Guitars - Vectric - Alex Navarro

Post by Alex Navarro »

PRS revised to 22 and24 frets
Aspire or Vcarve 8
Have you purchased may require the sending of files.
Attachments
Body-Front3.jpg
Body-Back2.jpg
Neck-Front-221.jpg
Neck-Front-inlay.jpg
Neck-Back-241.jpg
Alex Navarro

User avatar
mikeacg
Vectric Wizard
Posts: 655
Joined: Sun Nov 02, 2008 10:53 pm
Model of CNC Machine: Camaster Stinger, Sidewinder, SB 4x4
Location: Newberry, MI
Contact:

Re: Guitars - Vectric - Alex Navarro

Post by mikeacg »

Alex,

You are very generous in offering this free download. I have toyed with building a guitar but didn't really know where to start. This will help me to understand better what I need to do with my designs. Thank you very much! I will let you know how it goes for me...

Mike

User avatar
Alex Navarro
Vectric Craftsman
Posts: 175
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Re: Guitars - Vectric - Alex Navarro

Post by Alex Navarro »

You are welcome!

I hope you enjoy and see some photos if possible.

thank you
Alex Navarro

User avatar
Alex Navarro
Vectric Craftsman
Posts: 175
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Re: Guitars - Vectric - Alex Navarro

Post by Alex Navarro »

Alex Navarro

User avatar
sylvan356
Vectric Craftsman
Posts: 147
Joined: Thu Dec 12, 2013 5:28 pm
Model of CNC Machine: CAMaster Stinger 1 w/Rotary, Aspire 10
Location: Ormond Beach, Florida

Re: Guitars - Vectric - Alex Navarro

Post by sylvan356 »

I purchased some of Alex's work and, after examining the files, have to say that it is exemplary. Great work! And what is really nice is you can see exactly how he modeled the instruments which is very helpful in my learning to use the software. Thanks, Alex!

spyderxxx
Vectric Apprentice
Posts: 95
Joined: Sat Oct 06, 2012 11:51 am
Model of CNC Machine: my own design
Location: Cambridge Ontario

Re: Guitars - Vectric - Alex Navarro

Post by spyderxxx »

Alex

When I try to unzip the Jaguar files it requires a password.

Ed

User avatar
Alex Navarro
Vectric Craftsman
Posts: 175
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Re: Guitars - Vectric - Alex Navarro

Post by Alex Navarro »

Hello guys

The availability of the material is so that they know they are my work.
I find it interesting because many feel afraid to retrieve them.
As I'm reorganizing and preparing all new materials I would like to know more about who is interested in the files and some other information.
There are basic questions and other non-compulsory.
Inside the folder that you do have 4 download important files I figured you guys would read, but so far no one who wrote me read.

Cutter.txt
read.txt
Request.txt
Fender Jaguar.pdf

Please note these files.

Thanks for listening and comprehension.
Alex Navarro

User avatar
Alex Navarro
Vectric Craftsman
Posts: 175
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Re: Guitars - Vectric - Alex Navarro

Post by Alex Navarro »

sylvan356 wrote:I purchased some of Alex's work and, after examining the files, have to say that it is exemplary. Great work! And what is really nice is you can see exactly how he modeled the instruments which is very helpful in my learning to use the software. Thanks, Alex!
It is I who should thank him Sylvan!

Thank you for your post.
Alex Navarro

User avatar
gordread
Vectric Wizard
Posts: 380
Joined: Sun Jul 08, 2012 3:29 am
Model of CNC Machine: CNC Professor HDX
Location: Onoway, Alberta
Contact:

Re: Guitars - Vectric - Alex Navarro

Post by gordread »

Alex, I have been watching your work for the last few years, and your guitars are fantastic.

I've always wanted to build one, and I think that I will do just that, though it will have to wait until after the Christmas rush.

Thank you,

Gordon

User avatar
Alex Navarro
Vectric Craftsman
Posts: 175
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Re: Guitars - Vectric - Alex Navarro

Post by Alex Navarro »

gordread wrote:Alex, I have been watching your work for the last few years, and your guitars are fantastic.

I've always wanted to build one, and I think that I will do just that, though it will have to wait until after the Christmas rush.

Thank you,

Gordon
Hi! Thank you
I hope you make now and I´ll wait for photos from you!
Alex Navarro

User avatar
Alex Navarro
Vectric Craftsman
Posts: 175
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Re: Guitars - Vectric - Alex Navarro

Post by Alex Navarro »

Wow!

A new model here!

I wanted to make this model a long time.
Now I was able to do it!

Music Man
Attachments
02.jpg
05.jpg
08.jpg
10.jpg
Body_Front-3.jpg
Neck-Front.jpg
Alex Navarro

User avatar
Alex Navarro
Vectric Craftsman
Posts: 175
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Re: Guitars - Vectric - Alex Navarro

Post by Alex Navarro »

Attachments
Body_Back-3.jpg
Neck_Back2.jpg
Neck-Front3.jpg
Neck_Back5.jpg
Alex Navarro

Larry Cessna
Vectric Craftsman
Posts: 139
Joined: Wed Feb 12, 2014 3:52 pm
Model of CNC Machine: Laquna Swift

Re: Guitars - Vectric - Alex Navarro

Post by Larry Cessna »

This is so coll. I would like to try to cut a neck. I am having problems opening the files. I have v carve 8 and aspire 8. I can open the front. I can not open the neck back. I can download it but cant open it. It is a RAR. file??? Any help would be great.

Frunple

Re: Guitars - Vectric - Alex Navarro

Post by Frunple »

Whats the password for the rar file?

Post Reply