Back to doing inlays

An area to upload images of pieces cut using VCarve Pro
Post Reply
User avatar
Aussie
Vectric Wizard
Posts: 564
Joined: Fri Nov 30, 2018 1:44 am
Model of CNC Machine: Robotics Model 8
Location: Adelaide Australia

Back to doing inlays

Post by Aussie »

Been away for a while.
Chopping Board 490mm x 330mm x 40mm Walnut with Maple inlay, used the Zank style.
Gift for my local butcher.
Photo shows first coat of oil.
Aldgate Chopping Board 2.jpg
close up.jpg
Ron
Crafers Crafts

User avatar
TomWS
Vectric Wizard
Posts: 350
Joined: Sat Mar 06, 2021 11:06 pm
Model of CNC Machine: OB Lead 1010, Mach3; OB C-Beam 1060 grbl

Re: Back to doing inlays

Post by TomWS »

Aussie wrote:
Mon Aug 08, 2022 4:26 am
Gift for my local butcher.
You must love your local butcher! :D

Nice work!

User avatar
Aussie
Vectric Wizard
Posts: 564
Joined: Fri Nov 30, 2018 1:44 am
Model of CNC Machine: Robotics Model 8
Location: Adelaide Australia

Re: Back to doing inlays

Post by Aussie »

Maybe I will get a free Christmas ham…… his are the best marinated in maple syrup and some secret ingredients 😊
Ron
Crafers Crafts

User avatar
TomWS
Vectric Wizard
Posts: 350
Joined: Sat Mar 06, 2021 11:06 pm
Model of CNC Machine: OB Lead 1010, Mach3; OB C-Beam 1060 grbl

Re: Back to doing inlays

Post by TomWS »

Aussie wrote:
Mon Aug 08, 2022 1:43 pm
some secret ingredients
In the US that might include Bourbon! :P

User avatar
scottp55
Vectric Wizard
Posts: 4713
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: Back to doing inlays

Post by scottp55 »

Gifts like that to people like that....leads to some mighty fine cuts of meat!! :) :)
Wonderful job on that Ron!!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

User avatar
Aussie
Vectric Wizard
Posts: 564
Joined: Fri Nov 30, 2018 1:44 am
Model of CNC Machine: Robotics Model 8
Location: Adelaide Australia

Re: Back to doing inlays

Post by Aussie »

Thanks Scott,

I am enjoying doing real inlays again rather than the resin ones.
I am going to leave it at his shop door before he opens up….. it will drive him crazy trying to work out who left it for him 🤫
Ron
Crafers Crafts

User avatar
scottp55
Vectric Wizard
Posts: 4713
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: Back to doing inlays

Post by scottp55 »

Yep Ron :)
No matter what I ever get into....Wood is Special! :)
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

Luvtocarve
Vectric Craftsman
Posts: 192
Joined: Sat May 16, 2020 4:32 pm
Model of CNC Machine: Next Wave Piranha XL
Location: Wadsworth, Ohio
Contact:

Re: Back to doing inlays

Post by Luvtocarve »

Beautiful piece of work. I hope he hangs it and doesn’t chop meat on it :D
Steve Harp
Wadsworth, Ohio USA
www.trlw.us

Post Reply