First carve...
-
- Posts: 8
- Joined: Wed Apr 21, 2021 12:50 pm
- Model of CNC Machine: AR8 Pro V5
- Location: Huntsville, Utah
- Contact:
First carve...
The ram head is a purchased STL ring for 3D printing. I added a few other toolpaths to get this. I can't believe how easy it was to do this with Vcarve.
https://www.manfulldesign.com/
- scotttarnor
- Vectric Wizard
- Posts: 944
- Joined: Fri Aug 30, 2019 11:40 pm
- Model of CNC Machine: Piranha XL , Shark HD520
- Location: La Crosse WI
Re: First carve...
Nice first carve.
Gary
Gary
- Leo
- Vectric Wizard
- Posts: 4091
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: First carve...
Very Cool.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
-
- Vectric Wizard
- Posts: 409
- Joined: Thu Apr 06, 2017 3:07 am
- Model of CNC Machine: Camaster Stinger SR24
- Location: Addison, PA
Re: First carve...
That looks great. I love the display stand too.
Joe
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
-
- Vectric Craftsman
- Posts: 261
- Joined: Tue Oct 13, 2020 3:14 pm
- Model of CNC Machine: Sienci Long Mill
Re: First carve...
Very nicely done. I'd like information on its size and bits that you used so that I can learn from your experience,, please.
Re: First carve...
Well done, the frame is very well designed and made too.
Phil
Phil
-
- Posts: 8
- Joined: Wed Apr 21, 2021 12:50 pm
- Model of CNC Machine: AR8 Pro V5
- Location: Huntsville, Utah
- Contact:
Re: First carve...
Thank you for the comments.
Regarding bits and toolpaths, there were several of them:
3D roughing 0.5'' core box
3D finish, and (2) swept profiles 0.0625'' taper ball,
and (2) pockets with a 0.125'' down-cut
As I mentioned, the actual ram was purchased on CGTrader and is an STL file for 3D printing. I have it placed so it's both relief and anti-relief. The carving is nearly two inches thick. Overall size is about 8.5'' x 9'' x 2.5''.
I hadn't considered the extra parts to be a display stand or frame, but they work that way. The whole is single piece, glued together.
I made nine of these as gifts for my dad's survivors after he passed away last year. His initials are RAM.
I have more of my woodworking from the past at www.manfulldesign.com. Not carving, as this is my first.
Regarding bits and toolpaths, there were several of them:
3D roughing 0.5'' core box
3D finish, and (2) swept profiles 0.0625'' taper ball,
and (2) pockets with a 0.125'' down-cut
As I mentioned, the actual ram was purchased on CGTrader and is an STL file for 3D printing. I have it placed so it's both relief and anti-relief. The carving is nearly two inches thick. Overall size is about 8.5'' x 9'' x 2.5''.
I hadn't considered the extra parts to be a display stand or frame, but they work that way. The whole is single piece, glued together.
I made nine of these as gifts for my dad's survivors after he passed away last year. His initials are RAM.
I have more of my woodworking from the past at www.manfulldesign.com. Not carving, as this is my first.
Last edited by UtahJock on Sat Jan 29, 2022 6:12 pm, edited 1 time in total.
https://www.manfulldesign.com/
-
- Vectric Craftsman
- Posts: 261
- Joined: Tue Oct 13, 2020 3:14 pm
- Model of CNC Machine: Sienci Long Mill
Re: First carve...
Thanks much.