Here is one with just the pocket cut.
Zank V-Inlay Cutting Boards
-
Rcnewcomb
- Vectric Wizard
- Posts: 4339
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Zank V-Inlay Cutting Boards
The cutting boards are just inexpensive bamboo cutting boards from a discount department store. The inlays are from hard maple scrap I had left over from making the paradise boxes. Very quick and easy.
Here is one with just the pocket cut. Here is one with the inlay but before finish has been applied.
Here is one with just the pocket cut. Here is one with the inlay but before finish has been applied.
- Randall Newcomb
10 fingers in, 10 fingers out
another good day in the shop
10 fingers in, 10 fingers out
another good day in the shop
-
scotttarnor
- Vectric Wizard
- Posts: 350
- Joined: Fri Aug 30, 2019 11:40 pm
- Model of CNC Machine: Piranha XL , Shark HD520
- Location: La Crosse WI
-
Todd Bailey
- Vectric Staff
- Posts: 380
- Joined: Mon Nov 24, 2014 8:40 pm
- Model of CNC Machine: CraftCNC
- Contact:
Re: Zank V-Inlay Cutting Boards
Looking very nice Randy!!!!
Makes me want to give that inlay stuff another go...
Makes me want to give that inlay stuff another go...
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
Todd Bailey | Design and Make
DesignAndMake.com