Another of Michael Tyler's projects

An area to upload images of pieces cut using VCarve Pro
Post Reply
woody53
Vectric Wizard
Posts: 493
Joined: Sat Jun 11, 2011 3:27 pm
Model of CNC Machine: Probotix Meteor 25 x 50
Location: Jefferson City, Mo.

Another of Michael Tyler's projects

Post by woody53 »

My nephew started building his new house last month. I was thinking about what to make him, and saw this monthly project. Everything cut great, but I didn't like the painting. Thanks Michael, my brother says he will Love it. I did a little
different.
Dave
20200804_124702-1.jpg

User avatar
mtylerfl
Vectric Archimage
Posts: 5896
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: Another of Michael Tyler's projects

Post by mtylerfl »

Looks great, Dave! I showed this to my wife and she said I need to make one for her sister’s A-frame camp located on a lakeshore in Northern Maine (which we just returned from). Another project to add to my list!!
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

woody53
Vectric Wizard
Posts: 493
Joined: Sat Jun 11, 2011 3:27 pm
Model of CNC Machine: Probotix Meteor 25 x 50
Location: Jefferson City, Mo.

Re: Another of Michael Tyler's projects

Post by woody53 »

Thanks Michael. You know I always like doing you projects.

Dave

User avatar
scottp55
Vectric Wizard
Posts: 4717
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: Another of Michael Tyler's projects

Post by scottp55 »

What feeds and speeds did you use on your lobster Michael? :)
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

User avatar
mtylerfl
Vectric Archimage
Posts: 5896
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: Another of Michael Tyler's projects

Post by mtylerfl »

scottp55 wrote:
Wed Aug 05, 2020 2:48 pm
What feeds and speeds did you use on your lobster Michael? :)
I had two Lobster Rolls from my favorite roadside stand in Lee, ME (an entire lobster’s worth of meat in each roll)

My Speed driving there was about 50 mph

My Feed Rate was only 3 bpm (bites per minute)
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

User avatar
scottp55
Vectric Wizard
Posts: 4717
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: Another of Michael Tyler's projects

Post by scottp55 »

:D
Aah....Lobster Rolls don't help me.....STILL can't find a good bit for a 3 pound hard shell. :)
(LIKE your Feed rate for a Roll:)
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

User avatar
mtylerfl
Vectric Archimage
Posts: 5896
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: Another of Michael Tyler's projects

Post by mtylerfl »

:D

BTW, Scott, I checked your location about a week prior to my trip, just in case you were close enough to possibly arrange a quick visit with you. Unfortunately, you are about a 3 1/2 hr drive away from where we were, so I never checked-in...
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

User avatar
scottp55
Vectric Wizard
Posts: 4717
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: Another of Michael Tyler's projects

Post by scottp55 »

:) Yep...Mile 24 Rest Area exit puts you about 8 miles from me.
Lincoln neck of the woods is a good Hike:)
One Summer maybe you could plan it in to try 2 Lobster Rolls featured in Food Wars(?)....
for best Lobster Rolls.....eat one in T'ain't Town at the Clam Shack....
and then cross the bridge to the 'Port side and try Allison's... :)

You'd probably be able to ROLL to Lincoln with a big push! :D

Visitors always welcome at Scott's Critter Refuge:)

NICE sign Dave!!!! :)
Attachments
7.2.2020 FIRST FAWNS 2.jpg
7.2.2020 FIRST FAWNS SUCKLING.jpg
7.18.20 DIMI'S FIRST FAWN AT BACK DOOR 3.jpg
7.24.20 RACOON YEARLING AT DAWN FROGGING.jpg
6.28.20 OTTER NOON EEL 1.jpg
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

User avatar
mtylerfl
Vectric Archimage
Posts: 5896
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: Another of Michael Tyler's projects

Post by mtylerfl »

Thanks, Scott! Love to have more lobstah and see you too!

We go up to camp every year - usually in July. My wife is going to camp again for another week late-September through Oct 3 (meeting up with her two sisters there) to enjoy some Fall colors!
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

User avatar
scottp55
Vectric Wizard
Posts: 4717
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: Another of Michael Tyler's projects

Post by scottp55 »

First...Sorry for totally 'Jacking your thread Dave....especially with such a Fine result!! :oops:
Just couldn't resist tweaking Michael about Lobster:)

I'm about 2 weeks behind peak foliage in your Camp area Michael.
So her timing looks perfect for no bugs, and no Tourists :)
2016 10 8  wood ducks foliage.jpg
2016 10 10 beaver pond foliage.jpg
Be nice to see you in person as well!
Visitors always welcome!
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

woody53
Vectric Wizard
Posts: 493
Joined: Sat Jun 11, 2011 3:27 pm
Model of CNC Machine: Probotix Meteor 25 x 50
Location: Jefferson City, Mo.

Re: Another of Michael Tyler's projects

Post by woody53 »

Not a problem, Scott. l I follow you and Michael, just like everyone else on here. Glad you liked my welcome sign !!

Dave

User avatar
scottp55
Vectric Wizard
Posts: 4717
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
Location: Kennebunkport, Maine, US

Re: Another of Michael Tyler's projects

Post by scottp55 »

Whew...Thanks Dave:)
NOW the only thing is for Michael to do one before the leaves turn :)
Of course it will have to be a 100% TOTALLY accurate rendition of the A-Frame,
Right down to window sizes/trim/decking/stovepipe/nail holes/etc. :D
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.

BillK
Vectric Wizard
Posts: 594
Joined: Wed Mar 27, 2013 4:16 pm
Model of CNC Machine: CNC Shark Pro Plus
Contact:

Re: Another of Michael Tyler's projects

Post by BillK »

Wow, I got lost, is this post about lobster? Also, where’s Maine? 🦞

Nice work Dave.
BillK
https://www.facebook.com/CarvingsByKurtz

Post Reply