Bluetooth Speaker

An area to upload images of pieces cut using VCarve Pro
Post Reply
Ken Tipton
Vectric Apprentice
Posts: 70
Joined: Mon Feb 06, 2017 7:07 pm
Model of CNC Machine: Laguna IQ
Location: Ladera Ranch CA

Bluetooth Speaker

Post by Ken Tipton »

Hey all,

Here are a couple of pics of a bluetooth speaker I built. Had some scraps and had some speakers so this is what I came up with.
Attachments
20190630_082538.jpg
20190705_170315.jpg
20190705_170330.jpg

vgraves
Vectric Craftsman
Posts: 122
Joined: Sat Sep 29, 2012 2:04 am
Model of CNC Machine: CNC Router Parts PRO4848 w/LinuxCNC
Location: Knoxville, TN

Re: Bluetooth Speaker

Post by vgraves »

Very nice, I like it! How's the sound?

Ken Tipton
Vectric Apprentice
Posts: 70
Joined: Mon Feb 06, 2017 7:07 pm
Model of CNC Machine: Laguna IQ
Location: Ladera Ranch CA

Re: Bluetooth Speaker

Post by Ken Tipton »

it sounds good. I got all the internals from Parts Express. It is a 30w 2 channel board with built in bluetooth.

calgrdnr
Vectric Wizard
Posts: 969
Joined: Tue Mar 20, 2007 6:29 am
Model of CNC Machine: ShopBot prt with 4g upgrade
Location: Visalia, Ca

Re: Bluetooth Speaker

Post by calgrdnr »

Great job do you have pictures of the inside :) did you build crossover , parts list ?

Ken Tipton
Vectric Apprentice
Posts: 70
Joined: Mon Feb 06, 2017 7:07 pm
Model of CNC Machine: Laguna IQ
Location: Ladera Ranch CA

Re: Bluetooth Speaker

Post by Ken Tipton »

I didn't get a picture of the inside. As for the crossover it is just a inline cap as these speakers came from a set of monitors I had. I just tore apart the housings and made the new housing using the same airspace as the original. I don't have a parts list but can post one for anyone interested.

Ken

bolingerbe
Vectric Apprentice
Posts: 51
Joined: Tue Mar 16, 2010 1:38 am
Model of CNC Machine: MechMate

Re: Bluetooth Speaker

Post by bolingerbe »

This is a cool little project would make wonderful Christmas presents. If you do not care would you please post the parts list.


User avatar
adze_cnc
Vectric Apprentice
Posts: 913
Joined: Sat Jul 27, 2013 10:08 pm
Model of CNC Machine: AXYZ 4008
Location: Vancouver, BC, Canada

Re: Bluetooth Speaker

Post by adze_cnc »

Ken,

Finally got around to looking at this bookmarked thread. Interesting project. I must put this on my list of things to do.

It's amazing the difference two months make. The "Dayton Audio KAB-230v3 2x30W Class D Audio Amplifier Board with Bluetooth 4.0" is listed as no longer available at Parts Express. Would have to source it elsewhere.

Steven

User avatar
fretsman68
Vectric Wizard
Posts: 1067
Joined: Tue Sep 02, 2008 7:16 pm
Location: Pa. USA

Re: Bluetooth Speaker

Post by fretsman68 »

adze_cnc wrote:Ken,

Finally got around to looking at this bookmarked thread. Interesting project. I must put this on my list of things to do.

It's amazing the difference two months make. The "Dayton Audio KAB-230v3 2x30W Class D Audio Amplifier Board with Bluetooth 4.0" is listed as no longer available at Parts Express. Would have to source it elsewhere.

Steven
Hi, Steven,

Is this it?

https://www.parts-express.com/dayton-au ... bgQAvD_BwE

EDIT, I'm sorry, wrong one!
--------------
Dave

Ken Tipton
Vectric Apprentice
Posts: 70
Joined: Mon Feb 06, 2017 7:07 pm
Model of CNC Machine: Laguna IQ
Location: Ladera Ranch CA

Re: Bluetooth Speaker

Post by Ken Tipton »

Anyone of the other suggested amps would work. They aren't the most powerful anyway

Post Reply